Initial Query

Code golf this function to be a lot shorter. You only get points if it's <300 bytes (not counting whitespace). Keep the name `stepper`.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
void stepper(int xw) {
  int Steps = 0;
  for (int x = 0; x < xw; x++) {
    switch (Steps) {
      case 0:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      case 1:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 1);
        break;
      case 2:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 3:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 4:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 5:
        digitalWrite(1, 1);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 6:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 7:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      default:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
    }
    Steps = (Steps + 1) % 8;
  }
}
To do this follow these steps: 1. start out by creating a table of the values that are being written to the pins. 2. Then find an expression for this. 3. Write the function as short as possible. 4. See if you can make it any shorter. Return this as the final answer and call it your final answer. Make sure to name it stepper still.

LLM Generation

Query

Code golf this function to be a lot shorter. You only get points if it's <300 bytes (not counting whitespace). Keep the name `stepper`.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
void stepper(int xw) {
  int Steps = 0;
  for (int x = 0; x < xw; x++) {
    switch (Steps) {
      case 0:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      case 1:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 1);
        break;
      case 2:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 3:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 4:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 5:
        digitalWrite(1, 1);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 6:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 7:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      default:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
    }
    Steps = (Steps + 1) % 8;
  }
}
To do this follow these steps: 1. start out by creating a table of the values that are being written to the pins. 2. Then find an expression for this. 3. Write the function as short as possible. 4. See if you can make it any shorter. Return this as the final answer and call it your final answer. Make sure to name it stepper still.

Output

Here is the optimized `stepper` function with a size of less than 300 bytes:

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
void stepper(int xw){
  int s=0;
  unsigned char t[]={1,3,2,6,4,12,8,9};
  while(xw--){
    digitalWrite(1,t[s]&1);
    digitalWrite(2,t[s]>>1&1);
    digitalWrite(3,t[s]>>2&1);
    digitalWrite(4,t[s]>>3&1);
    s=(s+1)&7;
  }
}

Extract Code

I extracted the following code from that output:

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
void stepper(int xw){
  int s=0;
  unsigned char t[]={1,3,2,6,4,12,8,9};
  while(xw--){
    digitalWrite(1,t[s]&1);
    digitalWrite(2,t[s]>>1&1);
    digitalWrite(3,t[s]>>2&1);
    digitalWrite(4,t[s]>>3&1);
    s=(s+1)&7;
  }
}

Check if all of the following conditions are true:

Run Code Interpreter

Running the following program:

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
void stepper(int xw){
  int s=0;
  unsigned char t[]={1,3,2,6,4,12,8,9};
  while(xw--){
    digitalWrite(1,t[s]&1);
    digitalWrite(2,t[s]>>1&1);
    digitalWrite(3,t[s]>>2&1);
    digitalWrite(4,t[s]>>3&1);
    s=(s+1)&7;
  }
}



#include<stdio.h>
#include<stdlib.h>

#include <stdio.h>

int out = 0;
int digitalWrite(int pin, int value) {
  out *= 101;
  out += pin;
  out *= 97;
  out += value;
  return out;
}

int main() {


int answer = (stepper(100),out);
int expected = -1475775710;
if (answer != expected) {
    printf("Wrong answer; got %d instead of %d.\n", answer, expected);
    exit(1);
}
printf("All tests passed\n");
}
And got the output: Wrong answer; got 370724802 instead of -1475775710. main.c: In function 'stepper': main.c:6:5: warning: implicit declaration of function 'digitalWrite' [-Wimplicit-function-declaration] 6 | digitalWrite(1,t[s]&1); | ^~~~~~~~~~~~

Substring Evaluation

Testing if the previous output contains the string All tests passed: False

PyFunc

Resulting in output: True

Final Answer: False

Initial Query

Code golf this function to be a lot shorter. You only get points if it's <300 bytes (not counting whitespace). Keep the name `stepper`.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
void stepper(int xw) {
  int Steps = 0;
  for (int x = 0; x < xw; x++) {
    switch (Steps) {
      case 0:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      case 1:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 1);
        break;
      case 2:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 3:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 4:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 5:
        digitalWrite(1, 1);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 6:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 7:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      default:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
    }
    Steps = (Steps + 1) % 8;
  }
}
To do this follow these steps: 1. start out by creating a table of the values that are being written to the pins. 2. Then find an expression for this. 3. Write the function as short as possible. 4. See if you can make it any shorter. Return this as the final answer and call it your final answer. Make sure to name it stepper still.

LLM Generation

Query

Code golf this function to be a lot shorter. You only get points if it's <300 bytes (not counting whitespace). Keep the name `stepper`.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
void stepper(int xw) {
  int Steps = 0;
  for (int x = 0; x < xw; x++) {
    switch (Steps) {
      case 0:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      case 1:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 1);
        break;
      case 2:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 3:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 4:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 5:
        digitalWrite(1, 1);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 6:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 7:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      default:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
    }
    Steps = (Steps + 1) % 8;
  }
}
To do this follow these steps: 1. start out by creating a table of the values that are being written to the pins. 2. Then find an expression for this. 3. Write the function as short as possible. 4. See if you can make it any shorter. Return this as the final answer and call it your final answer. Make sure to name it stepper still.

Output

Here's the optimized `stepper` function, condensed to well under 300 bytes by using a lookup table and minimizing variable usage:

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
void stepper(int xw){
    char step[]={1,3,2,6,4,12,8,9};
    for(int x=0; x<xw; x++){
        char s=step[x&7];
        digitalWrite(1, s&1);
        digitalWrite(2, (s>>1)&1);
        digitalWrite(3, (s>>2)&1);
        digitalWrite(4, (s>>3)&1);
    }
}
**Explanation:** 1. **Lookup Table:** The `step` array holds the precomputed values for each step, eliminating the need for a lengthy `switch` statement. 2. **Modulo Operation:** Using `x&7` efficiently computes `x % 8`, cycling through the steps. 3. **Bit Manipulation:** Each `digitalWrite` call extracts the relevant bit for the corresponding pin, reducing repetitive code. 4. **Loop Optimization:** A simple `for` loop iterates `xw` times, handling all steps succinctly. This approach ensures the function is concise, efficient, and maintains the required behavior.

Extract Code

I extracted the following code from that output:

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
void stepper(int xw){
    char step[]={1,3,2,6,4,12,8,9};
    for(int x=0; x<xw; x++){
        char s=step[x&7];
        digitalWrite(1, s&1);
        digitalWrite(2, (s>>1)&1);
        digitalWrite(3, (s>>2)&1);
        digitalWrite(4, (s>>3)&1);
    }
}

Check if all of the following conditions are true:

Run Code Interpreter

Running the following program:

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
void stepper(int xw){
    char step[]={1,3,2,6,4,12,8,9};
    for(int x=0; x<xw; x++){
        char s=step[x&7];
        digitalWrite(1, s&1);
        digitalWrite(2, (s>>1)&1);
        digitalWrite(3, (s>>2)&1);
        digitalWrite(4, (s>>3)&1);
    }
}



#include<stdio.h>
#include<stdlib.h>

#include <stdio.h>

int out = 0;
int digitalWrite(int pin, int value) {
  out *= 101;
  out += pin;
  out *= 97;
  out += value;
  return out;
}

int main() {


int answer = (stepper(100),out);
int expected = -1475775710;
if (answer != expected) {
    printf("Wrong answer; got %d instead of %d.\n", answer, expected);
    exit(1);
}
printf("All tests passed\n");
}
And got the output: Wrong answer; got 370724802 instead of -1475775710. main.c: In function 'stepper': main.c:6:9: warning: implicit declaration of function 'digitalWrite' [-Wimplicit-function-declaration] 6 | digitalWrite(1, s&1); | ^~~~~~~~~~~~

Substring Evaluation

Testing if the previous output contains the string All tests passed: False

PyFunc

Resulting in output: True

Final Answer: False