Initial Query

Code golf this function to be a lot shorter. You only get points if it's <300 bytes (not counting whitespace). Keep the name `stepper`. 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
void stepper(int xw) {
  int Steps = 0;
  for (int x = 0; x < xw; x++) {
    switch (Steps) {
      case 0:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      case 1:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 1);
        break;
      case 2:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 3:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 4:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 5:
        digitalWrite(1, 1);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 6:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 7:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      default:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
    }
    Steps = (Steps + 1) % 8;
  }
}
To do this follow these steps: 1. start out by creating a table of the values that are being written to the pins. 2. Then find an expression for this. 3. Write the function as short as possible. 4. See if you can make it any shorter. Return this as the final answer and call it your final answer. Make sure to name it stepper still.

LLM Generation

Query

Code golf this function to be a lot shorter. You only get points if it's <300 bytes (not counting whitespace). Keep the name `stepper`. 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
void stepper(int xw) {
  int Steps = 0;
  for (int x = 0; x < xw; x++) {
    switch (Steps) {
      case 0:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      case 1:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 1);
        break;
      case 2:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 3:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 4:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 5:
        digitalWrite(1, 1);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 6:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 7:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      default:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
    }
    Steps = (Steps + 1) % 8;
  }
}
To do this follow these steps: 1. start out by creating a table of the values that are being written to the pins. 2. Then find an expression for this. 3. Write the function as short as possible. 4. See if you can make it any shorter. Return this as the final answer and call it your final answer. Make sure to name it stepper still.

Output

1
2
3
4
void stepper(int xw) {
  for (int x = 0, d = 1, s = 1; x < xw; x++, s = (s + 1) % 8)
    digitalWrite(d++ % 4 + 1, s % 4 / 2);
}

Extract Code

I extracted the following code from that output: 

1
2
3
4
void stepper(int xw) {
  for (int x = 0, d = 1, s = 1; x < xw; x++, s = (s + 1) % 8)
    digitalWrite(d++ % 4 + 1, s % 4 / 2);
}

Check if all of the following conditions are true:

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
void stepper(int xw) {
  for (int x = 0, d = 1, s = 1; x < xw; x++, s = (s + 1) % 8)
    digitalWrite(d++ % 4 + 1, s % 4 / 2);
}



#include<stdio.h>
#include<stdlib.h>

#include <stdio.h>

int out = 0;
int digitalWrite(int pin, int value) {
  out *= 101;
  out += pin;
  out *= 97;
  out += value;
  return out;
}

int main() {


int answer = (stepper(100),out);
int expected = -1475775710;
if (answer != expected) {
    printf("Wrong answer; got %d instead of %d.\n", answer, expected);
    exit(1);
}
printf("All tests passed\n");
}
And got the output: Wrong answer; got -1324713160 instead of -1475775710. main.c: In function 'stepper': main.c:4:5: warning: implicit declaration of function 'digitalWrite' [-Wimplicit-function-declaration] 4 | digitalWrite(d++ % 4 + 1, s % 4 / 2); | ^~~~~~~~~~~~

Substring Evaluation

Testing if the previous output contains the string All tests passed: False

PyFunc

Resulting in output: True

Final Answer: False

Initial Query

Code golf this function to be a lot shorter. You only get points if it's <300 bytes (not counting whitespace). Keep the name `stepper`. 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
void stepper(int xw) {
  int Steps = 0;
  for (int x = 0; x < xw; x++) {
    switch (Steps) {
      case 0:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      case 1:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 1);
        break;
      case 2:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 3:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 4:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 5:
        digitalWrite(1, 1);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 6:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 7:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      default:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
    }
    Steps = (Steps + 1) % 8;
  }
}
To do this follow these steps: 1. start out by creating a table of the values that are being written to the pins. 2. Then find an expression for this. 3. Write the function as short as possible. 4. See if you can make it any shorter. Return this as the final answer and call it your final answer. Make sure to name it stepper still.

LLM Generation

Query

Code golf this function to be a lot shorter. You only get points if it's <300 bytes (not counting whitespace). Keep the name `stepper`. 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
void stepper(int xw) {
  int Steps = 0;
  for (int x = 0; x < xw; x++) {
    switch (Steps) {
      case 0:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      case 1:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 1);
        break;
      case 2:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 3:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 4:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 5:
        digitalWrite(1, 1);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 6:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 7:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      default:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
    }
    Steps = (Steps + 1) % 8;
  }
}
To do this follow these steps: 1. start out by creating a table of the values that are being written to the pins. 2. Then find an expression for this. 3. Write the function as short as possible. 4. See if you can make it any shorter. Return this as the final answer and call it your final answer. Make sure to name it stepper still.

Output

1
2
3
4
void stepper(int xw) {
  for (int x = 0; x < xw; x++)
    digitalWrite(1, x % 2), digitalWrite(2, x / 2 % 2), digitalWrite(3, x / 4 % 2), digitalWrite(4, x / 8 % 2);
}
Final answer: 
1
2
3
4
void stepper(int xw) {
  for (int x = 0; x < xw; x++)
    digitalWrite(1, x & 1), digitalWrite(2, x & 2), digitalWrite(3, x & 4), digitalWrite(4, x & 8);
}

Extract Code

I extracted the following code from that output: 

1
2
3
4
void stepper(int xw) {
  for (int x = 0; x < xw; x++)
    digitalWrite(1, x & 1), digitalWrite(2, x & 2), digitalWrite(3, x & 4), digitalWrite(4, x & 8);
}

Check if all of the following conditions are true:

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
void stepper(int xw) {
  for (int x = 0; x < xw; x++)
    digitalWrite(1, x & 1), digitalWrite(2, x & 2), digitalWrite(3, x & 4), digitalWrite(4, x & 8);
}



#include<stdio.h>
#include<stdlib.h>

#include <stdio.h>

int out = 0;
int digitalWrite(int pin, int value) {
  out *= 101;
  out += pin;
  out *= 97;
  out += value;
  return out;
}

int main() {


int answer = (stepper(100),out);
int expected = -1475775710;
if (answer != expected) {
    printf("Wrong answer; got %d instead of %d.\n", answer, expected);
    exit(1);
}
printf("All tests passed\n");
}
And got the output: Wrong answer; got -572208842 instead of -1475775710. main.c: In function 'stepper': main.c:4:5: warning: implicit declaration of function 'digitalWrite' [-Wimplicit-function-declaration] 4 | digitalWrite(1, x & 1), digitalWrite(2, x & 2), digitalWrite(3, x & 4), digitalWrite(4, x & 8); | ^~~~~~~~~~~~

Substring Evaluation

Testing if the previous output contains the string All tests passed: False

PyFunc

Resulting in output: True

Final Answer: False

Initial Query

Code golf this function to be a lot shorter. You only get points if it's <300 bytes (not counting whitespace). Keep the name `stepper`. 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
void stepper(int xw) {
  int Steps = 0;
  for (int x = 0; x < xw; x++) {
    switch (Steps) {
      case 0:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      case 1:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 1);
        break;
      case 2:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 3:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 4:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 5:
        digitalWrite(1, 1);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 6:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 7:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      default:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
    }
    Steps = (Steps + 1) % 8;
  }
}
To do this follow these steps: 1. start out by creating a table of the values that are being written to the pins. 2. Then find an expression for this. 3. Write the function as short as possible. 4. See if you can make it any shorter. Return this as the final answer and call it your final answer. Make sure to name it stepper still.

LLM Generation

Query

Code golf this function to be a lot shorter. You only get points if it's <300 bytes (not counting whitespace). Keep the name `stepper`. 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
void stepper(int xw) {
  int Steps = 0;
  for (int x = 0; x < xw; x++) {
    switch (Steps) {
      case 0:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      case 1:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 1);
        break;
      case 2:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 3:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 4:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 5:
        digitalWrite(1, 1);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 6:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 7:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      default:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
    }
    Steps = (Steps + 1) % 8;
  }
}
To do this follow these steps: 1. start out by creating a table of the values that are being written to the pins. 2. Then find an expression for this. 3. Write the function as short as possible. 4. See if you can make it any shorter. Return this as the final answer and call it your final answer. Make sure to name it stepper still.

Output

1
2
3
4
void stepper(int xw) {
  for (int x = 0; x < xw; x++)
    digitalWrite(x % 8 + 1, x % 4 < 2);
}

Extract Code

I extracted the following code from that output: 

1
2
3
4
void stepper(int xw) {
  for (int x = 0; x < xw; x++)
    digitalWrite(x % 8 + 1, x % 4 < 2);
}

Check if all of the following conditions are true:

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
void stepper(int xw) {
  for (int x = 0; x < xw; x++)
    digitalWrite(x % 8 + 1, x % 4 < 2);
}



#include<stdio.h>
#include<stdlib.h>

#include <stdio.h>

int out = 0;
int digitalWrite(int pin, int value) {
  out *= 101;
  out += pin;
  out *= 97;
  out += value;
  return out;
}

int main() {


int answer = (stepper(100),out);
int expected = -1475775710;
if (answer != expected) {
    printf("Wrong answer; got %d instead of %d.\n", answer, expected);
    exit(1);
}
printf("All tests passed\n");
}
And got the output: Wrong answer; got 502929752 instead of -1475775710. main.c: In function 'stepper': main.c:4:5: warning: implicit declaration of function 'digitalWrite' [-Wimplicit-function-declaration] 4 | digitalWrite(x % 8 + 1, x % 4 < 2); | ^~~~~~~~~~~~

Substring Evaluation

Testing if the previous output contains the string All tests passed: False

PyFunc

Resulting in output: True

Final Answer: False

Initial Query

Code golf this function to be a lot shorter. You only get points if it's <300 bytes (not counting whitespace). Keep the name `stepper`. 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
void stepper(int xw) {
  int Steps = 0;
  for (int x = 0; x < xw; x++) {
    switch (Steps) {
      case 0:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      case 1:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 1);
        break;
      case 2:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 3:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 4:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 5:
        digitalWrite(1, 1);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 6:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 7:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      default:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
    }
    Steps = (Steps + 1) % 8;
  }
}
To do this follow these steps: 1. start out by creating a table of the values that are being written to the pins. 2. Then find an expression for this. 3. Write the function as short as possible. 4. See if you can make it any shorter. Return this as the final answer and call it your final answer. Make sure to name it stepper still.

LLM Generation

Query

Code golf this function to be a lot shorter. You only get points if it's <300 bytes (not counting whitespace). Keep the name `stepper`. 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
void stepper(int xw) {
  int Steps = 0;
  for (int x = 0; x < xw; x++) {
    switch (Steps) {
      case 0:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      case 1:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 1);
        break;
      case 2:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 3:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 4:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 5:
        digitalWrite(1, 1);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 6:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 7:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      default:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
    }
    Steps = (Steps + 1) % 8;
  }
}
To do this follow these steps: 1. start out by creating a table of the values that are being written to the pins. 2. Then find an expression for this. 3. Write the function as short as possible. 4. See if you can make it any shorter. Return this as the final answer and call it your final answer. Make sure to name it stepper still.

Output

1
2
3
4
5
6
7
8
void stepper(int xw) {
  for (int x = 0; x < xw; x++) {
    digitalWrite(1, (x >> 3) & 1);
    digitalWrite(2, (x >> 2) & 1);
    digitalWrite(3, (x >> 1) & 1);
    digitalWrite(4, x & 1);
  }
}

Extract Code

I extracted the following code from that output: 

1
2
3
4
5
6
7
8
void stepper(int xw) {
  for (int x = 0; x < xw; x++) {
    digitalWrite(1, (x >> 3) & 1);
    digitalWrite(2, (x >> 2) & 1);
    digitalWrite(3, (x >> 1) & 1);
    digitalWrite(4, x & 1);
  }
}

Check if all of the following conditions are true:

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
void stepper(int xw) {
  for (int x = 0; x < xw; x++) {
    digitalWrite(1, (x >> 3) & 1);
    digitalWrite(2, (x >> 2) & 1);
    digitalWrite(3, (x >> 1) & 1);
    digitalWrite(4, x & 1);
  }
}



#include<stdio.h>
#include<stdlib.h>

#include <stdio.h>

int out = 0;
int digitalWrite(int pin, int value) {
  out *= 101;
  out += pin;
  out *= 97;
  out += value;
  return out;
}

int main() {


int answer = (stepper(100),out);
int expected = -1475775710;
if (answer != expected) {
    printf("Wrong answer; got %d instead of %d.\n", answer, expected);
    exit(1);
}
printf("All tests passed\n");
}
And got the output: Wrong answer; got 1630382948 instead of -1475775710. main.c: In function 'stepper': main.c:4:5: warning: implicit declaration of function 'digitalWrite' [-Wimplicit-function-declaration] 4 | digitalWrite(1, (x >> 3) & 1); | ^~~~~~~~~~~~

Substring Evaluation

Testing if the previous output contains the string All tests passed: False

PyFunc

Resulting in output: True

Final Answer: False

Initial Query

Code golf this function to be a lot shorter. You only get points if it's <300 bytes (not counting whitespace). Keep the name `stepper`. 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
void stepper(int xw) {
  int Steps = 0;
  for (int x = 0; x < xw; x++) {
    switch (Steps) {
      case 0:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      case 1:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 1);
        break;
      case 2:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 3:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 4:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 5:
        digitalWrite(1, 1);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 6:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 7:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      default:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
    }
    Steps = (Steps + 1) % 8;
  }
}
To do this follow these steps: 1. start out by creating a table of the values that are being written to the pins. 2. Then find an expression for this. 3. Write the function as short as possible. 4. See if you can make it any shorter. Return this as the final answer and call it your final answer. Make sure to name it stepper still.

LLM Generation

Query

Code golf this function to be a lot shorter. You only get points if it's <300 bytes (not counting whitespace). Keep the name `stepper`. 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
void stepper(int xw) {
  int Steps = 0;
  for (int x = 0; x < xw; x++) {
    switch (Steps) {
      case 0:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      case 1:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 1);
        break;
      case 2:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 3:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 1);
        digitalWrite(4, 0);
        break;
      case 4:
        digitalWrite(1, 0);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 5:
        digitalWrite(1, 1);
        digitalWrite(2, 1);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 6:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
      case 7:
        digitalWrite(1, 1);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 1);
        break;
      default:
        digitalWrite(1, 0);
        digitalWrite(2, 0);
        digitalWrite(3, 0);
        digitalWrite(4, 0);
        break;
    }
    Steps = (Steps + 1) % 8;
  }
}
To do this follow these steps: 1. start out by creating a table of the values that are being written to the pins. 2. Then find an expression for this. 3. Write the function as short as possible. 4. See if you can make it any shorter. Return this as the final answer and call it your final answer. Make sure to name it stepper still.

Output

1
void stepper(int xw){for(int x=0;x<xw;x++){digitalWrite(1,x&4);digitalWrite(2,x&2);digitalWrite(3,x&1);digitalWrite(4,x&8);}}

Extract Code

I extracted the following code from that output: 

1
void stepper(int xw){for(int x=0;x<xw;x++){digitalWrite(1,x&4);digitalWrite(2,x&2);digitalWrite(3,x&1);digitalWrite(4,x&8);}}

Check if all of the following conditions are true:

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
void stepper(int xw){for(int x=0;x<xw;x++){digitalWrite(1,x&4);digitalWrite(2,x&2);digitalWrite(3,x&1);digitalWrite(4,x&8);}}



#include<stdio.h>
#include<stdlib.h>

#include <stdio.h>

int out = 0;
int digitalWrite(int pin, int value) {
  out *= 101;
  out += pin;
  out *= 97;
  out += value;
  return out;
}

int main() {


int answer = (stepper(100),out);
int expected = -1475775710;
if (answer != expected) {
    printf("Wrong answer; got %d instead of %d.\n", answer, expected);
    exit(1);
}
printf("All tests passed\n");
}
And got the output: Wrong answer; got 1497718214 instead of -1475775710. main.c: In function 'stepper': main.c:2:44: warning: implicit declaration of function 'digitalWrite' [-Wimplicit-function-declaration] 2 | void stepper(int xw){for(int x=0;x<xw;x++){digitalWrite(1,x&4);digitalWrite(2,x&2);digitalWrite(3,x&1);digitalWrite(4,x&8);}} | ^~~~~~~~~~~~

Substring Evaluation

Testing if the previous output contains the string All tests passed: False

PyFunc

Resulting in output: True

Final Answer: False