Initial Query

Here is the description of a new assembly language: * 8 registers (R1, R2, R3, R4, R5, R6, R7, R8) that can hold integers. * 1 flag that can hold a boolean value (True or False). * 100 memory addresses (0-99) that can hold integers. * 1 instruction pointer that points to the current instruction being executed. Each instruction is of the form OP ARG1 ARG2 ... where ARGn can be either a register (e.g., R1) or a constant (e.g., 10). Labels are written with a lowercase word followed by colon. The assembly language supports the following instructions: * SET Rx C: Assigns the value C to register Rx. * ADD Rx Ry Rz: Adds the values of Ry and Rz and stores the result in Rx. * (similarly for SUB, MUL, DIV, MOD) * EQ Rx Ry: Sets the flag to True if Rx and Ry are equal, False otherwise. * (similarly for NEQ, LT (Rx < Ry), LTE, GT, GTE) * INC/DEC Rx: Increments/Decrements the value of Rx by one. * JMP L: Jumps to label L unconditionally. * JT/JF (jump if true / jump if false) L: Jumps to label L if the is set or not set. * LOAD Rx M: Loads the value at memory address M into register Rx. * STORE Rx M: Stores the value of register Rx into memory address M. * HCF: Stops the program (with pizzazz) Given this assembly language, write a program that puts the first 20 square (1, 4, 9...) numbers in memory cells 0..19

LLM Generation

Query

Output

Here is a sample program in the new assembly language that calculates and stores the first 20 square numbers in memory cells 0 to 19:

; Program to calculate and store the first 20 square numbers in memory

SET R1 0          ; Initialize counter to 0
SET R2 1          ; Initialize number to be squared to 1
SET R3 0          ; Initialize square number result

loop:
    MUL R3 R2 R2   ; Calculate square number
    STORE R3 R1    ; Store square number in memory
    INC R1         ; Increment counter
    INC R2         ; Increment number to be squared
    LT R1 20       ; Check if counter is less than 20
    JF loop        ; Jump back to loop if counter is less than 20

HCF               ; Halt the program

This program uses registers R1, R2, and R3 to keep track of the counter, the number to be squared, and the square number result, respectively. It calculates the square of each number from 1 to 20 and stores the result in memory cells 0 to 19. The program then halts after calculating and storing all the square numbers.

Extract Code

I extracted the following code from that output:

; Program to calculate and store the first 20 square numbers in memory

SET R1 0          ; Initialize counter to 0
SET R2 1          ; Initialize number to be squared to 1
SET R3 0          ; Initialize square number result

loop:
    MUL R3 R2 R2   ; Calculate square number
    STORE R3 R1    ; Store square number in memory
    INC R1         ; Increment counter
    INC R2         ; Increment number to be squared
    LT R1 20       ; Check if counter is less than 20
    JF loop        ; Jump back to loop if counter is less than 20

HCF               ; Halt the program

PyFunc

Resulting in output: False

Initial Query

LLM Generation

Query

Output

SET R1 1
SET R2 0
SET R3 0
SET R4 0

loop:
    MUL R5 R1 R1
    STORE R5 R2
    INC R1
    INC R2
    INC R3
    LT R6 R3 20
    JF end
    JMP loop

end:
    HCF

Extract Code

I extracted the following code from that output:

SET R1 1
SET R2 0
SET R3 0
SET R4 0

loop:
    MUL R5 R1 R1
    STORE R5 R2
    INC R1
    INC R2
    INC R3
    LT R6 R3 20
    JF end
    JMP loop

end:
    HCF

PyFunc

list assignment index out of range Resulting in output: False

Initial Query

LLM Generation

Query

Output

SET R1 1
SET R2 0
SET R3 1
LOOP:
    MUL R4 R3 R3  ; square the current number
    STORE R4 R2    ; store the square number in memory
    INC R3         ; increment the current number
    INC R2         ; move to the next memory cell
    ADD R5 R1 R1
    LT R6 R5 21
    JF END LOOP
JMP LOOP
END:
    HCF

Extract Code

I extracted the following code from that output:

SET R1 1
SET R2 0
SET R3 1
LOOP:
    MUL R4 R3 R3  ; square the current number
    STORE R4 R2    ; store the square number in memory
    INC R3         ; increment the current number
    INC R2         ; move to the next memory cell
    ADD R5 R1 R1
    LT R6 R5 21
    JF END LOOP
JMP LOOP
END:
    HCF

PyFunc

list assignment index out of range Resulting in output: False

Initial Query

LLM Generation

Query

Output

SET R1 1
SET R2 0
SET R3 0

loop:
    MUL R4 R1 R1
    STORE R4 R2
    INC R1
    INC R2
    INC R3
    EQ R5 R3 20
    JF loop

HCF

Extract Code

I extracted the following code from that output:

SET R1 1
SET R2 0
SET R3 0

loop:
    MUL R4 R1 R1
    STORE R4 R2
    INC R1
    INC R2
    INC R3
    EQ R5 R3 20
    JF loop

HCF

PyFunc

list assignment index out of range Resulting in output: False

Initial Query

LLM Generation

Query

Output

SET R1 1
SET R2 0
SET R3 0

loop:
MUL R4 R1 R1
STORE R4 R2
INC R1
INC R2
INC R3
JMP loop

HCF

Extract Code

I extracted the following code from that output:

SET R1 1
SET R2 0
SET R3 0

loop:
MUL R4 R1 R1
STORE R4 R2
INC R1
INC R2
INC R3
JMP loop

HCF

PyFunc

list assignment index out of range Resulting in output: False