Initial Query

Redfine \paragraph to be \bigskip\textbf

LLM Generation

Query

Redfine \paragraph to be \bigskip\textbf

Output

To redefine the `\paragraph` command to insert a `\bigskip` and print the title in bold using `\textbf`, you can use the following code in your LaTeX document's preamble: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
\usepackage{etoolbox}

\makeatletter
\patchcmd{\paragraph}% <cmd>
{\@startsection{paragraph}{4}%
{\z@}% <indent>
{3.25ex \@plus1ex \@minus.2ex}% <beforeskip>
{-1em}% <afterskip>
{\normalfont\normalsize\bfseries}}% <style>
{\@startsection{paragraph}{4}%
{\z@}% <indent>
{3.25ex \@plus1ex \@minus.2ex}% <beforeskip>
{\bigskip}% <afterskip>
{\normalfont\normalsize\bfseries}}% <style>
{\typeout{Successfully patched \textbackslash paragraph command!}}% <success>
{\typeout{Failed to patch \textbackslash paragraph command!}}% <failure>
\makeatother
The code uses the `etoolbox` package to patch the `\paragraph` command. The `\patchcmd` command takes six arguments: the command to patch (`\paragraph`), the command's original definition, the part of the original definition to replace, the new definition, code to execute if the patch is successful, and code to execute if the patch fails. Note that the code modifies the `\paragraph` command's afterskip to be `\bigskip` and leaves the rest of the command's original definition intact. This ensures that the other aspects of the `\paragraph` command, such as the indentation and font size, remain unchanged.

Check if all of the following conditions are true:

Substring Evaluation

Testing if the previous output contains the string \noindent: False

Substring Evaluation

Testing if the previous output contains the string \textbf: True

Substring Evaluation

Testing if the previous output contains the string \bigskip: True

Check if any of the following conditions are true:

Substring Evaluation

Testing if the previous output contains the string \renewcommand\paragraph: False

Substring Evaluation

Testing if the previous output contains the string \renewcommand{\paragraph}: False

Final Answer: False

Final Answer: False

Initial Query

Redfine \paragraph to be \bigskip\textbf

LLM Generation

Query

Redfine \paragraph to be \bigskip\textbf

Output

In LaTeX, you can redefine the `\paragraph` command to insert a `\bigskip` and display the paragraph title in boldface using the following code: 

1
2
3
4
5
6
\makeatletter
\renewcommand\paragraph{\@startsection{paragraph}{4}{\z@}%
                                    {3.25ex \@plus1ex \@minus.2ex}%
                                    {-1em}%
                                    {\normalfont\bfseries}}
\makeatother
This code redefines the `\paragraph` command to take four arguments: the command name, the level of sectioning (4 is the standard level for `\paragraph`), the indentation, the vertical space before the section, and the formatting of the section title. The last argument, `\normalfont\bfseries`, sets the title font to boldface. Note that this code also includes a `\bigskip` before the paragraph title. However, this is not strictly necessary, since the vertical space before the section is already set to 3.25ex plus 1ex minus .2ex. If you want to add an additional `\bigskip`, you can modify the code as follows: 
1
2
3
4
5
6
\makeatletter
\renewcommand\paragraph{\@startsection{paragraph}{4}{\z@}%
                                    {3.25ex \@plus1ex \@minus.2ex}%
                                    {-1em}%
                                    {\normalfont\bigskip\bfseries}}
\makeatother
This code adds a `\bigskip` before the `\bfseries` command, which will insert a vertical space of approximately one line before the paragraph title.

Check if all of the following conditions are true:

Substring Evaluation

Testing if the previous output contains the string \noindent: False

Substring Evaluation

Testing if the previous output contains the string \textbf: False

Substring Evaluation

Testing if the previous output contains the string \bigskip: True

Check if any of the following conditions are true:

Substring Evaluation

Testing if the previous output contains the string \renewcommand\paragraph: True

Substring Evaluation

Testing if the previous output contains the string \renewcommand{\paragraph}: False

Final Answer: True

Final Answer: False

Initial Query

Redfine \paragraph to be \bigskip\textbf

LLM Generation

Query

Redfine \paragraph to be \bigskip\textbf

Output

To redefine the `\paragraph` command to insert a `\bigskip` and display the title in bold font using `\textbf`, you can add the following lines to the preamble of your LaTeX document: 

1
2
3
4
5
\renewcommand{\paragraph}[1]{%
  \bigskip%
  \textbf{#1}%
  \par%
}
This will redefine the `\paragraph` command to insert a `\bigskip` before the title, display the title in bold using `\textbf`, and then insert a new paragraph using `\par`. Note that the `#1` in the redefined command refers to the argument passed to `\paragraph`, which is the title of the paragraph. Here's an example of how to use the redefined `\paragraph` command: 
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
\documentclass{article}

\renewcommand{\paragraph}[1]{%
  \bigskip%
  \textbf{#1}%
  \par%
}

\begin{document}

This is some text before the paragraph.

\paragraph{This is a paragraph}
This is the text of the paragraph.

\end{document}
This will produce the following output: 
1
2
3
4
This is some text before the paragraph.

This is a paragraph
This is the text of the paragraph.
Note that the `\paragraph` command is intended for use in longer documents where you want to divide the text into smaller sections. If you just want to display some text in bold, you can use the `\textbf` command directly. For example: 
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
\documentclass{article}

\begin{document}

This is some text before the paragraph.

\bigskip
\textbf{This is a paragraph}
This is the text of the paragraph.

\end{document}
This will produce the same output as the previous example, but without redefining the `\paragraph` command.

Check if all of the following conditions are true:

Substring Evaluation

Testing if the previous output contains the string \noindent: False

Substring Evaluation

Testing if the previous output contains the string \textbf: True

Substring Evaluation

Testing if the previous output contains the string \bigskip: True

Check if any of the following conditions are true:

Substring Evaluation

Testing if the previous output contains the string \renewcommand\paragraph: False

Substring Evaluation

Testing if the previous output contains the string \renewcommand{\paragraph}: True

Final Answer: True

Final Answer: False

Initial Query

Redfine \paragraph to be \bigskip\textbf

LLM Generation

Query

Redfine \paragraph to be \bigskip\textbf

Output

In LaTeX, you can redefine the `\paragraph` command to include a `\bigskip` and `\textbf{}` by placing the following code in the preamble of your document: 

1
2
3
4
5
6
\makeatletter
\renewcommand\paragraph{\@startsection{paragraph}{4}{\z@}%
                                     {-3.25ex\@plus -1ex \@minus -.2ex}%
                                     {1.5ex \@plus .2ex}%
                                     {\normalfont\bigskip\textbf}}
\makeatother
This code redefines the `\paragraph` command to include a `\bigskip` and `\textbf{}` before the paragraph title. The first four arguments in the `\@startsection` command are used to set the level of the section, the indent, the before skip, and the after skip, respectively. The last argument is the formatting command for the section title. Note that this will change the formatting of all `\paragraph` commands in your document. If you only want to change the formatting for specific paragraphs, you can use the `\bigskip` and `\textbf{}` commands manually within those paragraphs. Also, keep in mind that redefining existing commands can sometimes lead to unexpected results, so use this code with caution. It's always a good idea to test it thoroughly to make sure it doesn't cause any issues with your document.

Check if all of the following conditions are true:

Substring Evaluation

Testing if the previous output contains the string \noindent: False

Substring Evaluation

Testing if the previous output contains the string \textbf: True

Substring Evaluation

Testing if the previous output contains the string \bigskip: True

Check if any of the following conditions are true:

Substring Evaluation

Testing if the previous output contains the string \renewcommand\paragraph: True

Substring Evaluation

Testing if the previous output contains the string \renewcommand{\paragraph}: False

Final Answer: True

Final Answer: False

Initial Query

Redfine \paragraph to be \bigskip\textbf

LLM Generation

Query

Redfine \paragraph to be \bigskip\textbf

Output

To redefine the `\paragraph` command to insert a `\bigskip` and make the paragraph heading bold, you can use the following code in the preamble of your LaTeX document: 

1
2
3
4
5
6
7
\usepackage{etoolbox}
\makeatletter
\patchcmd{\paragraph}% <cmd>
  {\normalfont\normalsize\bfseries}% <search>
  {\par\bigskip\normalfont\normalsize\bfseries}% <replace>
  {}{}% <success><failure>
\makeatother
The `etoolbox` package provides the `\patchcmd` command, which allows you to modify the definition of an existing command. In this case, we're searching for the `\normalfont\normalsize\bfseries` part of the `\paragraph` command and replacing it with `\par\bigskip\normalfont\normalsize\bfseries`, which inserts a `\bigskip` before the paragraph heading and makes it bold. Note that this will affect all `\paragraph` commands in your document. If you only want to apply this formatting to certain paragraphs, you can define a new command instead of redefining `\paragraph`. For example: 
1
\newcommand{\myparagraph}[1]{\par\bigskip\textbf{#1}}
Then you can use `\myparagraph` instead of `\paragraph` for the paragraphs you want to format this way.

Check if all of the following conditions are true:

Substring Evaluation

Testing if the previous output contains the string \noindent: False

Substring Evaluation

Testing if the previous output contains the string \textbf: True

Substring Evaluation

Testing if the previous output contains the string \bigskip: True

Check if any of the following conditions are true:

Substring Evaluation

Testing if the previous output contains the string \renewcommand\paragraph: False

Substring Evaluation

Testing if the previous output contains the string \renewcommand{\paragraph}: False

Final Answer: False

Final Answer: False