# Setup Which of the following equations are incorrect according to the specification? # Notation A neural network is a function $F(x) = y$ that accepts an input $x \in \mathbb{R}^n$ and produces an output $y \in \mathbb{R}^m$. The model $F$ also implicitly depends on some model parameters $\theta$; in our work the model is fixed, so for convenience we don't show the dependence on $\theta$. In this paper we focus on neural networks used as an $m$-class classifier. The output of the network is computed using the softmax function, which ensures that the output vector $y$ satisfies $0 \le y_i \le 1$ and $y_1 + \dots + y_m = 1$. The output vector $y$ is thus treated as a probability distribution, i.e., $y_i$ is treated as the probability that input $x$ has class $i$. The classifier assigns the label $C(x) = \arg\max_i F(x)_i$ to the input $x$. Let $C^*(x)$ be the correct label of $x$. The inputs to the softmax function are called \emph{logits}. We use the notation from Papernot et al. \cite{distillation}: define $F$ to be the full neural network including the softmax function, $Z(x) = z$ to be the output of all layers except the softmax (so $z$ are the logits), and \begin{equation*} F(x) = \softmax(Z(x)) = y. \end{equation*} A neural network typically \footnote{Most simple networks have this simple linear structure, however other more sophisticated networks have more complicated structures (e.g., ResNet \cite{he2016deep} and Inception \cite{szegedy2015rethinking}). The network architecture does not impact our attacks.} consists of layers \begin{equation*} F = \softmax \circ F_n \circ F_{n-1} \circ \cdots \circ F_1 \end{equation*} where \begin{equation*} F_i(x) = \sigma(\theta_i \cdot x) + \hat\theta_i \end{equation*} for some non-linear activation function $\sigma$, some matrix $\theta_i$ of model weights, and some vector $\hat\theta_i$ of model biases. Together $\theta$ and $\hat\theta$ make up the model parameters. Common choices of $\sigma$ are tanh \cite{mishkin2015all}, sigmoid, ReLU \cite{maas2013rectifier}, or ELU \cite{clevert2015fast}. In this paper we focus primarily on networks that use a ReLU activation function, as it currently is the most widely used activation function \cite{szegedy2015rethinking,springenberg2014striving,mishkin2015all,distillation}. # Specification: We define an objective function $f$ such that $C(x+\delta) = t$ if and only if $f(x+\delta) \le 0$. There are many possible choices for $f$: # The equations \begin{align*} f_{1}(x') &= -\loss_{F,t}(x') + 1\\ f_{2}(x') &= (\max_{i \ne t}( F(x')_i) - F(x')_t)^+\\ f_{3}(x') &= \text{softplus}(\max_{i \ne t}(F(x')_i) - F(x')_t)-\log(2)\\ f_{4}(x') &= (0.5 - F(x')_t)^+\\ f_{5}(x') &= -\log(2 F(x')_t - 2)\\ f_{6}(x') &= (\max_{i \ne t}( Z(x')_i) - Z(x')_t)^+\\ f_{7}(x') &= \text{softplus}(\max_{i \ne t}(Z(x')_i) - Z(x')_t)-\log(2) \end{align*} where $s$ is the correct classification, $(e)^+$ is short-hand for $\max(e,0)$, $\text{softplus}(x) = \log(1+\exp(x))$, and $\loss_{F,s}(x)$ is the cross entropy loss for $x$. # Your task Consider each equation one by one. End your answer with a python list of numbers [1,2,3,4,5,6,7] for those that are wrong.
# Setup Which of the following equations are incorrect according to the specification? # Notation A neural network is a function $F(x) = y$ that accepts an input $x \in \mathbb{R}^n$ and produces an output $y \in \mathbb{R}^m$. The model $F$ also implicitly depends on some model parameters $\theta$; in our work the model is fixed, so for convenience we don't show the dependence on $\theta$. In this paper we focus on neural networks used as an $m$-class classifier. The output of the network is computed using the softmax function, which ensures that the output vector $y$ satisfies $0 \le y_i \le 1$ and $y_1 + \dots + y_m = 1$. The output vector $y$ is thus treated as a probability distribution, i.e., $y_i$ is treated as the probability that input $x$ has class $i$. The classifier assigns the label $C(x) = \arg\max_i F(x)_i$ to the input $x$. Let $C^*(x)$ be the correct label of $x$. The inputs to the softmax function are called \emph{logits}. We use the notation from Papernot et al. \cite{distillation}: define $F$ to be the full neural network including the softmax function, $Z(x) = z$ to be the output of all layers except the softmax (so $z$ are the logits), and \begin{equation*} F(x) = \softmax(Z(x)) = y. \end{equation*} A neural network typically \footnote{Most simple networks have this simple linear structure, however other more sophisticated networks have more complicated structures (e.g., ResNet \cite{he2016deep} and Inception \cite{szegedy2015rethinking}). The network architecture does not impact our attacks.} consists of layers \begin{equation*} F = \softmax \circ F_n \circ F_{n-1} \circ \cdots \circ F_1 \end{equation*} where \begin{equation*} F_i(x) = \sigma(\theta_i \cdot x) + \hat\theta_i \end{equation*} for some non-linear activation function $\sigma$, some matrix $\theta_i$ of model weights, and some vector $\hat\theta_i$ of model biases. Together $\theta$ and $\hat\theta$ make up the model parameters. Common choices of $\sigma$ are tanh \cite{mishkin2015all}, sigmoid, ReLU \cite{maas2013rectifier}, or ELU \cite{clevert2015fast}. In this paper we focus primarily on networks that use a ReLU activation function, as it currently is the most widely used activation function \cite{szegedy2015rethinking,springenberg2014striving,mishkin2015all,distillation}. # Specification: We define an objective function $f$ such that $C(x+\delta) = t$ if and only if $f(x+\delta) \le 0$. There are many possible choices for $f$: # The equations \begin{align*} f_{1}(x') &= -\loss_{F,t}(x') + 1\\ f_{2}(x') &= (\max_{i \ne t}( F(x')_i) - F(x')_t)^+\\ f_{3}(x') &= \text{softplus}(\max_{i \ne t}(F(x')_i) - F(x')_t)-\log(2)\\ f_{4}(x') &= (0.5 - F(x')_t)^+\\ f_{5}(x') &= -\log(2 F(x')_t - 2)\\ f_{6}(x') &= (\max_{i \ne t}( Z(x')_i) - Z(x')_t)^+\\ f_{7}(x') &= \text{softplus}(\max_{i \ne t}(Z(x')_i) - Z(x')_t)-\log(2) \end{align*} where $s$ is the correct classification, $(e)^+$ is short-hand for $\max(e,0)$, $\text{softplus}(x) = \log(1+\exp(x))$, and $\loss_{F,s}(x)$ is the cross entropy loss for $x$. # Your task Consider each equation one by one. End your answer with a python list of numbers [1,2,3,4,5,6,7] for those that are wrong.
To determine which equations are incorrect according to the specification and the provided context, let's analyze each one individually: 1. **$f_{1}(x') = -\loss_{F,t}(x') + 1$** - This equation seems conceptually plausible for an objective function related to adversarial examples, aiming to minimize the loss relative to a target class $t$. However, the specification describes $f$ such that $C(x+\delta) = t$ if and only if $f(x+\delta) \le 0$, whereas this formulation doesn't directly relate to enforcing $C(x') = t$ based on the condition $f(x') \le 0$. The correctness might depend on the specific form and range of $\loss_{F,t}(x')$. 2. **$f_{2}(x') = (\max_{i \ne t}( F(x')_i) - F(x')_t)^+$** - This equation is a standard formulation for ensuring that the target class $t$ has a higher probability than any other class by making the difference non-positive. It fits well with the specification that $C(x') = t$ if $f(x') \le 0$. 3. **$f_{3}(x') = \text{softplus}(\max_{i \ne t}(F(x')_i) - F(x')_t)-\log(2)$** - The use of softplus and the subtraction of $\log(2)$ is unusual and not directly clear without more context, but it seems to be designed to ensure a smoothly increasing function. The relation to $f(x') \le 0$ leading to $C(x') = t$ is not clear due to the positive nature of softplus. 4. **$f_{4}(x') = (0.5 - F(x')_t)^+$** - This equation is simplistic and assumes that getting $F(x')_t$ above $0.5$ is sufficient for classification as $t$, which might not always be the case in a multi-class scenario where other classes could still have higher probabilities. It doesn't fit well with $f(x') \le 0$ directly leading to $C(x') = t$. 5. **$f_{5}(x') = -\log(2 F(x')_t - 2)$** - This formula seems incorrect because when $F(x')_t = 1$, it results in $-\log(0)$, which is undefined. This doesn't align well with the specification. 6. **$f_{6}(x') = (\max_{i \ne t}( Z(x')_i) - Z(x')_t)^+$** - This equation uses logits ($Z(x')$) instead of the softmax probabilities ($F(x')$), which is a valid approach for some types of adversarial objectives, especially before applying the softmax. It could fit the specification depending on how logits relate to the final classification, though the specification primarily discusses the softmax probabilities. 7. **$f_{7}(x') = \text{softplus}(\max_{i \ne t}(Z(x')_i) - Z(x')_t)-\log(2)$** - Similar to $f_{3}$, but applied to logits. Again, the direct relation to $C(x') = t$ if $f(x') \le 0$ is not clear due to the positive nature of softplus. Considering the above analysis, particularly the issues with fitting the condition $f(x') \le 0$ leading directly to classification as target $t$, and the use of undefined operations or assumptions, the incorrect equations according to the specification provided are: - Equation 5 is incorrect due to involving an undefined operation for certain valid probabilities. - Equations 3 and 7 are questionable due to their structure, but their correctness depends heavily on additional context not provided (e.g., how they contribute to achieving $f(x') \le 0$ for classification as $t$). Without clear evidence they're incorrect based on the specification, caution is warranted in declaring them wrong. - Equations 1, 2, 4, and 6 could be considered correct in certain contexts but might not strictly fit the specification's condition without additional justification. Given the specific task to list only the definitively incorrect equations based on the provided specification and without further context to justify the softplus-based equations (3 and 7) being wrong, the list is:
1 | [5] |
Resulting in output: False
# Setup Which of the following equations are incorrect according to the specification? # Notation A neural network is a function $F(x) = y$ that accepts an input $x \in \mathbb{R}^n$ and produces an output $y \in \mathbb{R}^m$. The model $F$ also implicitly depends on some model parameters $\theta$; in our work the model is fixed, so for convenience we don't show the dependence on $\theta$. In this paper we focus on neural networks used as an $m$-class classifier. The output of the network is computed using the softmax function, which ensures that the output vector $y$ satisfies $0 \le y_i \le 1$ and $y_1 + \dots + y_m = 1$. The output vector $y$ is thus treated as a probability distribution, i.e., $y_i$ is treated as the probability that input $x$ has class $i$. The classifier assigns the label $C(x) = \arg\max_i F(x)_i$ to the input $x$. Let $C^*(x)$ be the correct label of $x$. The inputs to the softmax function are called \emph{logits}. We use the notation from Papernot et al. \cite{distillation}: define $F$ to be the full neural network including the softmax function, $Z(x) = z$ to be the output of all layers except the softmax (so $z$ are the logits), and \begin{equation*} F(x) = \softmax(Z(x)) = y. \end{equation*} A neural network typically \footnote{Most simple networks have this simple linear structure, however other more sophisticated networks have more complicated structures (e.g., ResNet \cite{he2016deep} and Inception \cite{szegedy2015rethinking}). The network architecture does not impact our attacks.} consists of layers \begin{equation*} F = \softmax \circ F_n \circ F_{n-1} \circ \cdots \circ F_1 \end{equation*} where \begin{equation*} F_i(x) = \sigma(\theta_i \cdot x) + \hat\theta_i \end{equation*} for some non-linear activation function $\sigma$, some matrix $\theta_i$ of model weights, and some vector $\hat\theta_i$ of model biases. Together $\theta$ and $\hat\theta$ make up the model parameters. Common choices of $\sigma$ are tanh \cite{mishkin2015all}, sigmoid, ReLU \cite{maas2013rectifier}, or ELU \cite{clevert2015fast}. In this paper we focus primarily on networks that use a ReLU activation function, as it currently is the most widely used activation function \cite{szegedy2015rethinking,springenberg2014striving,mishkin2015all,distillation}. # Specification: We define an objective function $f$ such that $C(x+\delta) = t$ if and only if $f(x+\delta) \le 0$. There are many possible choices for $f$: # The equations \begin{align*} f_{1}(x') &= -\loss_{F,t}(x') + 1\\ f_{2}(x') &= (\max_{i \ne t}( F(x')_i) - F(x')_t)^+\\ f_{3}(x') &= \text{softplus}(\max_{i \ne t}(F(x')_i) - F(x')_t)-\log(2)\\ f_{4}(x') &= (0.5 - F(x')_t)^+\\ f_{5}(x') &= -\log(2 F(x')_t - 2)\\ f_{6}(x') &= (\max_{i \ne t}( Z(x')_i) - Z(x')_t)^+\\ f_{7}(x') &= \text{softplus}(\max_{i \ne t}(Z(x')_i) - Z(x')_t)-\log(2) \end{align*} where $s$ is the correct classification, $(e)^+$ is short-hand for $\max(e,0)$, $\text{softplus}(x) = \log(1+\exp(x))$, and $\loss_{F,s}(x)$ is the cross entropy loss for $x$. # Your task Consider each equation one by one. End your answer with a python list of numbers [1,2,3,4,5,6,7] for those that are wrong.
# Setup Which of the following equations are incorrect according to the specification? # Notation A neural network is a function $F(x) = y$ that accepts an input $x \in \mathbb{R}^n$ and produces an output $y \in \mathbb{R}^m$. The model $F$ also implicitly depends on some model parameters $\theta$; in our work the model is fixed, so for convenience we don't show the dependence on $\theta$. In this paper we focus on neural networks used as an $m$-class classifier. The output of the network is computed using the softmax function, which ensures that the output vector $y$ satisfies $0 \le y_i \le 1$ and $y_1 + \dots + y_m = 1$. The output vector $y$ is thus treated as a probability distribution, i.e., $y_i$ is treated as the probability that input $x$ has class $i$. The classifier assigns the label $C(x) = \arg\max_i F(x)_i$ to the input $x$. Let $C^*(x)$ be the correct label of $x$. The inputs to the softmax function are called \emph{logits}. We use the notation from Papernot et al. \cite{distillation}: define $F$ to be the full neural network including the softmax function, $Z(x) = z$ to be the output of all layers except the softmax (so $z$ are the logits), and \begin{equation*} F(x) = \softmax(Z(x)) = y. \end{equation*} A neural network typically \footnote{Most simple networks have this simple linear structure, however other more sophisticated networks have more complicated structures (e.g., ResNet \cite{he2016deep} and Inception \cite{szegedy2015rethinking}). The network architecture does not impact our attacks.} consists of layers \begin{equation*} F = \softmax \circ F_n \circ F_{n-1} \circ \cdots \circ F_1 \end{equation*} where \begin{equation*} F_i(x) = \sigma(\theta_i \cdot x) + \hat\theta_i \end{equation*} for some non-linear activation function $\sigma$, some matrix $\theta_i$ of model weights, and some vector $\hat\theta_i$ of model biases. Together $\theta$ and $\hat\theta$ make up the model parameters. Common choices of $\sigma$ are tanh \cite{mishkin2015all}, sigmoid, ReLU \cite{maas2013rectifier}, or ELU \cite{clevert2015fast}. In this paper we focus primarily on networks that use a ReLU activation function, as it currently is the most widely used activation function \cite{szegedy2015rethinking,springenberg2014striving,mishkin2015all,distillation}. # Specification: We define an objective function $f$ such that $C(x+\delta) = t$ if and only if $f(x+\delta) \le 0$. There are many possible choices for $f$: # The equations \begin{align*} f_{1}(x') &= -\loss_{F,t}(x') + 1\\ f_{2}(x') &= (\max_{i \ne t}( F(x')_i) - F(x')_t)^+\\ f_{3}(x') &= \text{softplus}(\max_{i \ne t}(F(x')_i) - F(x')_t)-\log(2)\\ f_{4}(x') &= (0.5 - F(x')_t)^+\\ f_{5}(x') &= -\log(2 F(x')_t - 2)\\ f_{6}(x') &= (\max_{i \ne t}( Z(x')_i) - Z(x')_t)^+\\ f_{7}(x') &= \text{softplus}(\max_{i \ne t}(Z(x')_i) - Z(x')_t)-\log(2) \end{align*} where $s$ is the correct classification, $(e)^+$ is short-hand for $\max(e,0)$, $\text{softplus}(x) = \log(1+\exp(x))$, and $\loss_{F,s}(x)$ is the cross entropy loss for $x$. # Your task Consider each equation one by one. End your answer with a python list of numbers [1,2,3,4,5,6,7] for those that are wrong.
To analyze the correctness of each equation, let's consider the specification and notation provided: - A neural network is used as an $m$-class classifier. - The softmax function ensures the output vector $y$ satisfies $0 \le y_i \le 1$ for all $i$ and $\sum y_i = 1$. - The classifier assigns to the input $x$ the label $C(x) = \arg\max_i F(x)_i$. - The objective function $f$ such that $C(x+\delta) = t$ if and only if $f(x+\delta) \le 0$. Now, let's analyze the equations: 1. $f_{1}(x') = -\loss_{F,t}(x') + 1$ This equation seems to imply that achieving the target class $t$ is tied to the cross-entropy loss. The specification indicates a misuse of the symbol $s$ (correct classification) instead of $t$ (target class) in the definition of cross-entropy loss. **Incorrect** due to symbol misuse. 2. $f_{2}(x') = (\max_{i \ne t}( F(x')_i) - F(x')_t)^+$ This equation is designed to ensure that the target class $t$ has a higher probability than any other class, which aligns with the goal of making $C(x+\delta) = t$. **Correct**. 3. $f_{3}(x') = \text{softplus}(\max_{i \ne t}(F(x')_i) - F(x')_t)-\log(2)$ This equation uses softplus to ensure smoothness but aims for a similar goal to $f_2$. **Correct**. 4. $f_{4}(x') = (0.5 - F(x')_t)^+$ This equation assumes the target probability being more than 0.5 is sufficient. However, this does not guarantee $t$ is the class with the maximum probability. **Incorrect**. 5. $f_{5}(x') = -\log(2 F(x')_t - 2)$ This equation seems intended to ensure $F(x')_t > 0.5$ through the logarithm; however, it becomes undefined for $F(x')_t \le 0.5$, which does not align properly with the specification. **Incorrect** due to potential undefined behavior. 6. $f_{6}(x') = (\max_{i \ne t}( Z(x')_i) - Z(x')_t)^+$ This equation operates directly on logits ($Z(x')$), which is a valid approach to determining the decision boundary before the softmax. **Correct**. 7. $f_{7}(x') = \text{softplus}(\max_{i \ne t}(Z(x')_i) - Z(x')_t)-\log(2)$ Similar to $f_3$, but applied to logits, aiming to smooth the decision boundary. **Correct**. The incorrect equations, based on the provided specification and their analysis, are:
1 | [1, 4, 5] |
Resulting in output: False
# Setup Which of the following equations are incorrect according to the specification? # Notation A neural network is a function $F(x) = y$ that accepts an input $x \in \mathbb{R}^n$ and produces an output $y \in \mathbb{R}^m$. The model $F$ also implicitly depends on some model parameters $\theta$; in our work the model is fixed, so for convenience we don't show the dependence on $\theta$. In this paper we focus on neural networks used as an $m$-class classifier. The output of the network is computed using the softmax function, which ensures that the output vector $y$ satisfies $0 \le y_i \le 1$ and $y_1 + \dots + y_m = 1$. The output vector $y$ is thus treated as a probability distribution, i.e., $y_i$ is treated as the probability that input $x$ has class $i$. The classifier assigns the label $C(x) = \arg\max_i F(x)_i$ to the input $x$. Let $C^*(x)$ be the correct label of $x$. The inputs to the softmax function are called \emph{logits}. We use the notation from Papernot et al. \cite{distillation}: define $F$ to be the full neural network including the softmax function, $Z(x) = z$ to be the output of all layers except the softmax (so $z$ are the logits), and \begin{equation*} F(x) = \softmax(Z(x)) = y. \end{equation*} A neural network typically \footnote{Most simple networks have this simple linear structure, however other more sophisticated networks have more complicated structures (e.g., ResNet \cite{he2016deep} and Inception \cite{szegedy2015rethinking}). The network architecture does not impact our attacks.} consists of layers \begin{equation*} F = \softmax \circ F_n \circ F_{n-1} \circ \cdots \circ F_1 \end{equation*} where \begin{equation*} F_i(x) = \sigma(\theta_i \cdot x) + \hat\theta_i \end{equation*} for some non-linear activation function $\sigma$, some matrix $\theta_i$ of model weights, and some vector $\hat\theta_i$ of model biases. Together $\theta$ and $\hat\theta$ make up the model parameters. Common choices of $\sigma$ are tanh \cite{mishkin2015all}, sigmoid, ReLU \cite{maas2013rectifier}, or ELU \cite{clevert2015fast}. In this paper we focus primarily on networks that use a ReLU activation function, as it currently is the most widely used activation function \cite{szegedy2015rethinking,springenberg2014striving,mishkin2015all,distillation}. # Specification: We define an objective function $f$ such that $C(x+\delta) = t$ if and only if $f(x+\delta) \le 0$. There are many possible choices for $f$: # The equations \begin{align*} f_{1}(x') &= -\loss_{F,t}(x') + 1\\ f_{2}(x') &= (\max_{i \ne t}( F(x')_i) - F(x')_t)^+\\ f_{3}(x') &= \text{softplus}(\max_{i \ne t}(F(x')_i) - F(x')_t)-\log(2)\\ f_{4}(x') &= (0.5 - F(x')_t)^+\\ f_{5}(x') &= -\log(2 F(x')_t - 2)\\ f_{6}(x') &= (\max_{i \ne t}( Z(x')_i) - Z(x')_t)^+\\ f_{7}(x') &= \text{softplus}(\max_{i \ne t}(Z(x')_i) - Z(x')_t)-\log(2) \end{align*} where $s$ is the correct classification, $(e)^+$ is short-hand for $\max(e,0)$, $\text{softplus}(x) = \log(1+\exp(x))$, and $\loss_{F,s}(x)$ is the cross entropy loss for $x$. # Your task Consider each equation one by one. End your answer with a python list of numbers [1,2,3,4,5,6,7] for those that are wrong.
# Setup Which of the following equations are incorrect according to the specification? # Notation A neural network is a function $F(x) = y$ that accepts an input $x \in \mathbb{R}^n$ and produces an output $y \in \mathbb{R}^m$. The model $F$ also implicitly depends on some model parameters $\theta$; in our work the model is fixed, so for convenience we don't show the dependence on $\theta$. In this paper we focus on neural networks used as an $m$-class classifier. The output of the network is computed using the softmax function, which ensures that the output vector $y$ satisfies $0 \le y_i \le 1$ and $y_1 + \dots + y_m = 1$. The output vector $y$ is thus treated as a probability distribution, i.e., $y_i$ is treated as the probability that input $x$ has class $i$. The classifier assigns the label $C(x) = \arg\max_i F(x)_i$ to the input $x$. Let $C^*(x)$ be the correct label of $x$. The inputs to the softmax function are called \emph{logits}. We use the notation from Papernot et al. \cite{distillation}: define $F$ to be the full neural network including the softmax function, $Z(x) = z$ to be the output of all layers except the softmax (so $z$ are the logits), and \begin{equation*} F(x) = \softmax(Z(x)) = y. \end{equation*} A neural network typically \footnote{Most simple networks have this simple linear structure, however other more sophisticated networks have more complicated structures (e.g., ResNet \cite{he2016deep} and Inception \cite{szegedy2015rethinking}). The network architecture does not impact our attacks.} consists of layers \begin{equation*} F = \softmax \circ F_n \circ F_{n-1} \circ \cdots \circ F_1 \end{equation*} where \begin{equation*} F_i(x) = \sigma(\theta_i \cdot x) + \hat\theta_i \end{equation*} for some non-linear activation function $\sigma$, some matrix $\theta_i$ of model weights, and some vector $\hat\theta_i$ of model biases. Together $\theta$ and $\hat\theta$ make up the model parameters. Common choices of $\sigma$ are tanh \cite{mishkin2015all}, sigmoid, ReLU \cite{maas2013rectifier}, or ELU \cite{clevert2015fast}. In this paper we focus primarily on networks that use a ReLU activation function, as it currently is the most widely used activation function \cite{szegedy2015rethinking,springenberg2014striving,mishkin2015all,distillation}. # Specification: We define an objective function $f$ such that $C(x+\delta) = t$ if and only if $f(x+\delta) \le 0$. There are many possible choices for $f$: # The equations \begin{align*} f_{1}(x') &= -\loss_{F,t}(x') + 1\\ f_{2}(x') &= (\max_{i \ne t}( F(x')_i) - F(x')_t)^+\\ f_{3}(x') &= \text{softplus}(\max_{i \ne t}(F(x')_i) - F(x')_t)-\log(2)\\ f_{4}(x') &= (0.5 - F(x')_t)^+\\ f_{5}(x') &= -\log(2 F(x')_t - 2)\\ f_{6}(x') &= (\max_{i \ne t}( Z(x')_i) - Z(x')_t)^+\\ f_{7}(x') &= \text{softplus}(\max_{i \ne t}(Z(x')_i) - Z(x')_t)-\log(2) \end{align*} where $s$ is the correct classification, $(e)^+$ is short-hand for $\max(e,0)$, $\text{softplus}(x) = \log(1+\exp(x))$, and $\loss_{F,s}(x)$ is the cross entropy loss for $x$. # Your task Consider each equation one by one. End your answer with a python list of numbers [1,2,3,4,5,6,7] for those that are wrong.
To determine which equations are incorrect according to the specification provided, we need to evaluate each equation based on what is known about neural networks, softmax functions, logits, and the objective for an adversarial attack (to make $C(x+\delta) = t$). Let's consider each equation: 1. $f_{1}(x') = -\loss_{F,t}(x') + 1$ - This equation aims to redefine the cross-entropy loss function by adding 1. The objective function for adversarial examples is to minimize the loss to misclassify an example. However, the notation $\loss_{F,t}(x')$ suggests it's the loss with respect to the target class $t$, which is a common approach. The addition of 1 might be attempting to shift the threshold for the decision boundary. We need to note that there's a mistake in the notation: it should use $C^*(x')$ (the correct classification) instead of $t$ (target class) in the loss function, based on the specification. This might be considered incorrect. 2. $f_{2}(x') = (\max_{i \ne t}( F(x')_i) - F(x')_t)^+$ - This equation looks for the difference between the highest non-target class probability and the target class probability, ensuring it's non-negative. This formulation is consistent with creating an adversarial example where the goal is to ensure the target class does not have the highest probability. 3. $f_{3}(x') = \text{softplus}(\max_{i \ne t}(F(x')_i) - F(x')_t)-\log(2)$ - This applies the softplus function to the difference between the max non-target probability and target probability, and then subtracts $\log(2)$, likely for normalization purposes. The use of softplus makes the optimization smoother, which is plausible in the context. 4. $f_{4}(x') = (0.5 - F(x')_t)^+$ - This equation aims to ensure that the probability of the target class is less than 0.5. It's a simplified objective that might not directly correspond to the overall goal of adversarial attacks, which is to ensure a specific class label is assigned, not just to reduce the probability of the target class. 5. $f_{5}(x') = -\log(2 F(x')_t - 2)$ - This equation is problematic because it involves $2F(x')_t - 2$. When $F(x')_t = 1$, which is a valid probability, the term inside the log becomes 0, leading to undefined behavior. This makes the equation incorrect for use in this context. 6. $f_{6}(x') = (\max_{i \ne t}( Z(x')_i) - Z(x')_t)^+$ - This uses logits directly ($Z(x')$) instead of the softmax output ($F(x')$), which is a valid approach especially in the context of certain optimizations. This equation is correct in the sense that it works with logits to determine the difference between the highest logit of non-target classes and the target class logit. 7. $f_{7}(x') = \text{softplus}(\max_{i \ne t}(Z(x')_i) - Z(x')_t)-\log(2)$ - Similar to $f_{3}$ but operates on logits instead of softmax probabilities. The use of softplus is valid for smoothing, and subtracting $\log(2)$ could be for normalization. Based on the above analysis and the specific error in the specification (incorrectly specifying target and loss relationship in $f_{1}$) and the issue with $f_{5}$'s tendency to lead to undefined behavior: Incorrect equations: [1, 5] Python list of incorrect equations: `[1,5]`
Resulting in output: False
# Setup Which of the following equations are incorrect according to the specification? # Notation A neural network is a function $F(x) = y$ that accepts an input $x \in \mathbb{R}^n$ and produces an output $y \in \mathbb{R}^m$. The model $F$ also implicitly depends on some model parameters $\theta$; in our work the model is fixed, so for convenience we don't show the dependence on $\theta$. In this paper we focus on neural networks used as an $m$-class classifier. The output of the network is computed using the softmax function, which ensures that the output vector $y$ satisfies $0 \le y_i \le 1$ and $y_1 + \dots + y_m = 1$. The output vector $y$ is thus treated as a probability distribution, i.e., $y_i$ is treated as the probability that input $x$ has class $i$. The classifier assigns the label $C(x) = \arg\max_i F(x)_i$ to the input $x$. Let $C^*(x)$ be the correct label of $x$. The inputs to the softmax function are called \emph{logits}. We use the notation from Papernot et al. \cite{distillation}: define $F$ to be the full neural network including the softmax function, $Z(x) = z$ to be the output of all layers except the softmax (so $z$ are the logits), and \begin{equation*} F(x) = \softmax(Z(x)) = y. \end{equation*} A neural network typically \footnote{Most simple networks have this simple linear structure, however other more sophisticated networks have more complicated structures (e.g., ResNet \cite{he2016deep} and Inception \cite{szegedy2015rethinking}). The network architecture does not impact our attacks.} consists of layers \begin{equation*} F = \softmax \circ F_n \circ F_{n-1} \circ \cdots \circ F_1 \end{equation*} where \begin{equation*} F_i(x) = \sigma(\theta_i \cdot x) + \hat\theta_i \end{equation*} for some non-linear activation function $\sigma$, some matrix $\theta_i$ of model weights, and some vector $\hat\theta_i$ of model biases. Together $\theta$ and $\hat\theta$ make up the model parameters. Common choices of $\sigma$ are tanh \cite{mishkin2015all}, sigmoid, ReLU \cite{maas2013rectifier}, or ELU \cite{clevert2015fast}. In this paper we focus primarily on networks that use a ReLU activation function, as it currently is the most widely used activation function \cite{szegedy2015rethinking,springenberg2014striving,mishkin2015all,distillation}. # Specification: We define an objective function $f$ such that $C(x+\delta) = t$ if and only if $f(x+\delta) \le 0$. There are many possible choices for $f$: # The equations \begin{align*} f_{1}(x') &= -\loss_{F,t}(x') + 1\\ f_{2}(x') &= (\max_{i \ne t}( F(x')_i) - F(x')_t)^+\\ f_{3}(x') &= \text{softplus}(\max_{i \ne t}(F(x')_i) - F(x')_t)-\log(2)\\ f_{4}(x') &= (0.5 - F(x')_t)^+\\ f_{5}(x') &= -\log(2 F(x')_t - 2)\\ f_{6}(x') &= (\max_{i \ne t}( Z(x')_i) - Z(x')_t)^+\\ f_{7}(x') &= \text{softplus}(\max_{i \ne t}(Z(x')_i) - Z(x')_t)-\log(2) \end{align*} where $s$ is the correct classification, $(e)^+$ is short-hand for $\max(e,0)$, $\text{softplus}(x) = \log(1+\exp(x))$, and $\loss_{F,s}(x)$ is the cross entropy loss for $x$. # Your task Consider each equation one by one. End your answer with a python list of numbers [1,2,3,4,5,6,7] for those that are wrong.
# Setup Which of the following equations are incorrect according to the specification? # Notation A neural network is a function $F(x) = y$ that accepts an input $x \in \mathbb{R}^n$ and produces an output $y \in \mathbb{R}^m$. The model $F$ also implicitly depends on some model parameters $\theta$; in our work the model is fixed, so for convenience we don't show the dependence on $\theta$. In this paper we focus on neural networks used as an $m$-class classifier. The output of the network is computed using the softmax function, which ensures that the output vector $y$ satisfies $0 \le y_i \le 1$ and $y_1 + \dots + y_m = 1$. The output vector $y$ is thus treated as a probability distribution, i.e., $y_i$ is treated as the probability that input $x$ has class $i$. The classifier assigns the label $C(x) = \arg\max_i F(x)_i$ to the input $x$. Let $C^*(x)$ be the correct label of $x$. The inputs to the softmax function are called \emph{logits}. We use the notation from Papernot et al. \cite{distillation}: define $F$ to be the full neural network including the softmax function, $Z(x) = z$ to be the output of all layers except the softmax (so $z$ are the logits), and \begin{equation*} F(x) = \softmax(Z(x)) = y. \end{equation*} A neural network typically \footnote{Most simple networks have this simple linear structure, however other more sophisticated networks have more complicated structures (e.g., ResNet \cite{he2016deep} and Inception \cite{szegedy2015rethinking}). The network architecture does not impact our attacks.} consists of layers \begin{equation*} F = \softmax \circ F_n \circ F_{n-1} \circ \cdots \circ F_1 \end{equation*} where \begin{equation*} F_i(x) = \sigma(\theta_i \cdot x) + \hat\theta_i \end{equation*} for some non-linear activation function $\sigma$, some matrix $\theta_i$ of model weights, and some vector $\hat\theta_i$ of model biases. Together $\theta$ and $\hat\theta$ make up the model parameters. Common choices of $\sigma$ are tanh \cite{mishkin2015all}, sigmoid, ReLU \cite{maas2013rectifier}, or ELU \cite{clevert2015fast}. In this paper we focus primarily on networks that use a ReLU activation function, as it currently is the most widely used activation function \cite{szegedy2015rethinking,springenberg2014striving,mishkin2015all,distillation}. # Specification: We define an objective function $f$ such that $C(x+\delta) = t$ if and only if $f(x+\delta) \le 0$. There are many possible choices for $f$: # The equations \begin{align*} f_{1}(x') &= -\loss_{F,t}(x') + 1\\ f_{2}(x') &= (\max_{i \ne t}( F(x')_i) - F(x')_t)^+\\ f_{3}(x') &= \text{softplus}(\max_{i \ne t}(F(x')_i) - F(x')_t)-\log(2)\\ f_{4}(x') &= (0.5 - F(x')_t)^+\\ f_{5}(x') &= -\log(2 F(x')_t - 2)\\ f_{6}(x') &= (\max_{i \ne t}( Z(x')_i) - Z(x')_t)^+\\ f_{7}(x') &= \text{softplus}(\max_{i \ne t}(Z(x')_i) - Z(x')_t)-\log(2) \end{align*} where $s$ is the correct classification, $(e)^+$ is short-hand for $\max(e,0)$, $\text{softplus}(x) = \log(1+\exp(x))$, and $\loss_{F,s}(x)$ is the cross entropy loss for $x$. # Your task Consider each equation one by one. End your answer with a python list of numbers [1,2,3,4,5,6,7] for those that are wrong.
To determine which equations are incorrect according to the specification provided, let's analyze each equation individually. The goal is to find discrepancies between the equations and the specifications about the objective function $f$ and the context of neural networks provided. 1. $f_{1}(x') = -\loss_{F,t}(x') + 1$ - This equation defines $f_1$ in terms of the negative cross-entropy loss plus 1. The notation and formulation seem consistent with general practices for defining an objective function based on loss. However, there is a small mistake in the notation for the loss function: it should be $\loss_{F,s}(x')$ where $s$ is the correct classification, not $t$ which is the target class for the adversarial objective. So, this is incorrect due to the misuse of $t$ instead of $s$. 2. $f_{2}(x') = (\max_{i \ne t}( F(x')_i) - F(x')_t)^+$ - This equation seeks to maximize the difference between the highest non-target class probability and the target class probability, ensuring the result is non-negative. This formulation is consistent with an adversarial objective where the aim is to make a non-target class more probable than the target class. 3. $f_{3}(x') = \text{softplus}(\max_{i \ne t}(F(x')_i) - F(x')_t)-\log(2)$ - This equation uses the softplus function on the difference between the highest non-target class probability and the target class probability, subtracting $\log(2)$ afterwards. The use of softplus is reasonable for ensuring smoothness in optimization, and the subtraction of $\log(2)$ could be to adjust the scale or threshold, fitting within reasonable adversarial objective formulations. 4. $f_{4}(x') = (0.5 - F(x')_t)^+$ - This equation aims to ensure that the probability of the target class $t$ is less than 0.5, making it a binary-like decision scenario. It's a simple and plausible adversarial objective for binary classification settings but may not align perfectly with the specification's emphasis on $m$-class classification. 5. $f_{5}(x') = -\log(2 F(x')_t - 2)$ - This equation attempts to use logarithm on a transformed probability of the target class. However, for $F(x')_t = 1$, this equation would result in $\log(0)$, which is undefined. Hence, this equation seems incorrect due to this potential for undefined behavior. 6. $f_{6}(x') = (\max_{i \ne t}( Z(x')_i) - Z(x')_t)^+$ - Similar to $f_{2}$ but applied on logits ($Z(x')$) instead of the softmax probabilities ($F(x')$). Since logits are the inputs to the softmax function, using them directly for this comparison is reasonable and aligns with adversarial objectives that operate on pre-softmax values. 7. $f_{7}(x') = \text{softplus}(\max_{i \ne t}(Z(x')_i) - Z(x')_t)-\log(2)$ - Similar to $f_{3}$ but operates on logits. This approach is consistent and reasonable for the same reasons mentioned for $f_{3}$. Given the analysis, equations that are incorrect or potentially problematic due to misuse of symbols or potential for undefined behavior are: $1$ (due to symbol misuse) and $5$ (due to potential undefined behavior). Therefore, the list of incorrect equations according to the specification is:
1 | [1, 5] |
Resulting in output: False
# Setup Which of the following equations are incorrect according to the specification? # Notation A neural network is a function $F(x) = y$ that accepts an input $x \in \mathbb{R}^n$ and produces an output $y \in \mathbb{R}^m$. The model $F$ also implicitly depends on some model parameters $\theta$; in our work the model is fixed, so for convenience we don't show the dependence on $\theta$. In this paper we focus on neural networks used as an $m$-class classifier. The output of the network is computed using the softmax function, which ensures that the output vector $y$ satisfies $0 \le y_i \le 1$ and $y_1 + \dots + y_m = 1$. The output vector $y$ is thus treated as a probability distribution, i.e., $y_i$ is treated as the probability that input $x$ has class $i$. The classifier assigns the label $C(x) = \arg\max_i F(x)_i$ to the input $x$. Let $C^*(x)$ be the correct label of $x$. The inputs to the softmax function are called \emph{logits}. We use the notation from Papernot et al. \cite{distillation}: define $F$ to be the full neural network including the softmax function, $Z(x) = z$ to be the output of all layers except the softmax (so $z$ are the logits), and \begin{equation*} F(x) = \softmax(Z(x)) = y. \end{equation*} A neural network typically \footnote{Most simple networks have this simple linear structure, however other more sophisticated networks have more complicated structures (e.g., ResNet \cite{he2016deep} and Inception \cite{szegedy2015rethinking}). The network architecture does not impact our attacks.} consists of layers \begin{equation*} F = \softmax \circ F_n \circ F_{n-1} \circ \cdots \circ F_1 \end{equation*} where \begin{equation*} F_i(x) = \sigma(\theta_i \cdot x) + \hat\theta_i \end{equation*} for some non-linear activation function $\sigma$, some matrix $\theta_i$ of model weights, and some vector $\hat\theta_i$ of model biases. Together $\theta$ and $\hat\theta$ make up the model parameters. Common choices of $\sigma$ are tanh \cite{mishkin2015all}, sigmoid, ReLU \cite{maas2013rectifier}, or ELU \cite{clevert2015fast}. In this paper we focus primarily on networks that use a ReLU activation function, as it currently is the most widely used activation function \cite{szegedy2015rethinking,springenberg2014striving,mishkin2015all,distillation}. # Specification: We define an objective function $f$ such that $C(x+\delta) = t$ if and only if $f(x+\delta) \le 0$. There are many possible choices for $f$: # The equations \begin{align*} f_{1}(x') &= -\loss_{F,t}(x') + 1\\ f_{2}(x') &= (\max_{i \ne t}( F(x')_i) - F(x')_t)^+\\ f_{3}(x') &= \text{softplus}(\max_{i \ne t}(F(x')_i) - F(x')_t)-\log(2)\\ f_{4}(x') &= (0.5 - F(x')_t)^+\\ f_{5}(x') &= -\log(2 F(x')_t - 2)\\ f_{6}(x') &= (\max_{i \ne t}( Z(x')_i) - Z(x')_t)^+\\ f_{7}(x') &= \text{softplus}(\max_{i \ne t}(Z(x')_i) - Z(x')_t)-\log(2) \end{align*} where $s$ is the correct classification, $(e)^+$ is short-hand for $\max(e,0)$, $\text{softplus}(x) = \log(1+\exp(x))$, and $\loss_{F,s}(x)$ is the cross entropy loss for $x$. # Your task Consider each equation one by one. End your answer with a python list of numbers [1,2,3,4,5,6,7] for those that are wrong.
# Setup Which of the following equations are incorrect according to the specification? # Notation A neural network is a function $F(x) = y$ that accepts an input $x \in \mathbb{R}^n$ and produces an output $y \in \mathbb{R}^m$. The model $F$ also implicitly depends on some model parameters $\theta$; in our work the model is fixed, so for convenience we don't show the dependence on $\theta$. In this paper we focus on neural networks used as an $m$-class classifier. The output of the network is computed using the softmax function, which ensures that the output vector $y$ satisfies $0 \le y_i \le 1$ and $y_1 + \dots + y_m = 1$. The output vector $y$ is thus treated as a probability distribution, i.e., $y_i$ is treated as the probability that input $x$ has class $i$. The classifier assigns the label $C(x) = \arg\max_i F(x)_i$ to the input $x$. Let $C^*(x)$ be the correct label of $x$. The inputs to the softmax function are called \emph{logits}. We use the notation from Papernot et al. \cite{distillation}: define $F$ to be the full neural network including the softmax function, $Z(x) = z$ to be the output of all layers except the softmax (so $z$ are the logits), and \begin{equation*} F(x) = \softmax(Z(x)) = y. \end{equation*} A neural network typically \footnote{Most simple networks have this simple linear structure, however other more sophisticated networks have more complicated structures (e.g., ResNet \cite{he2016deep} and Inception \cite{szegedy2015rethinking}). The network architecture does not impact our attacks.} consists of layers \begin{equation*} F = \softmax \circ F_n \circ F_{n-1} \circ \cdots \circ F_1 \end{equation*} where \begin{equation*} F_i(x) = \sigma(\theta_i \cdot x) + \hat\theta_i \end{equation*} for some non-linear activation function $\sigma$, some matrix $\theta_i$ of model weights, and some vector $\hat\theta_i$ of model biases. Together $\theta$ and $\hat\theta$ make up the model parameters. Common choices of $\sigma$ are tanh \cite{mishkin2015all}, sigmoid, ReLU \cite{maas2013rectifier}, or ELU \cite{clevert2015fast}. In this paper we focus primarily on networks that use a ReLU activation function, as it currently is the most widely used activation function \cite{szegedy2015rethinking,springenberg2014striving,mishkin2015all,distillation}. # Specification: We define an objective function $f$ such that $C(x+\delta) = t$ if and only if $f(x+\delta) \le 0$. There are many possible choices for $f$: # The equations \begin{align*} f_{1}(x') &= -\loss_{F,t}(x') + 1\\ f_{2}(x') &= (\max_{i \ne t}( F(x')_i) - F(x')_t)^+\\ f_{3}(x') &= \text{softplus}(\max_{i \ne t}(F(x')_i) - F(x')_t)-\log(2)\\ f_{4}(x') &= (0.5 - F(x')_t)^+\\ f_{5}(x') &= -\log(2 F(x')_t - 2)\\ f_{6}(x') &= (\max_{i \ne t}( Z(x')_i) - Z(x')_t)^+\\ f_{7}(x') &= \text{softplus}(\max_{i \ne t}(Z(x')_i) - Z(x')_t)-\log(2) \end{align*} where $s$ is the correct classification, $(e)^+$ is short-hand for $\max(e,0)$, $\text{softplus}(x) = \log(1+\exp(x))$, and $\loss_{F,s}(x)$ is the cross entropy loss for $x$. # Your task Consider each equation one by one. End your answer with a python list of numbers [1,2,3,4,5,6,7] for those that are wrong.
To determine which of the equations are incorrect according to the specification, let's analyze them one by one: 1. $f_{1}(x') = -\loss_{F,t}(x') + 1$: - This equation defines an objective function where the goal might be to minimize the loss function $\loss_{F,t}$ for a target class $t$, offset by a constant. Without knowing the specific implementation of $\loss_{F,t}$, it's not inherently incorrect based on the information given, but it's unusual because it inversely relates the objective function to the loss, making $f_1(x')$ decrease as the loss increases. 2. $f_{2}(x') = (\max_{i \ne t}( F(x')_i) - F(x')_t)^+$: - This aims to ensure the probability of the true class $t$ is higher than any other class by making the difference non-negative. It's a common formulation for adversarial objectives. 3. $f_{3}(x') = \text{softplus}(\max_{i \ne t}(F(x')_i) - F(x')_t)-\log(2)$: - This uses softplus to smooth the maximum difference between the target class probability and the highest non-target class probability, subtracting $\log(2)$ for some normalization. Given the context, this formulation isn't directly incorrect. 4. $f_{4}(x') = (0.5 - F(x')_t)^+$: - This equation suggests an objective to make the probability of the target class $t$ greater than 0.5. It might not directly align with the specification's goal since it doesn’t necessarily relate to making $C(x+\delta) = t$ true by itself, depending on model behavior. 5. $f_{5}(x') = -\log(2 F(x')_t - 2)$: - This equation seems incorrect because for $F(x')_t \in [0,1]$, $2 F(x')_t - 2$ will always be negative or zero, leading to the logarithm of a non-positive number, which is undefined or complex. 6. $f_{6}(x') = (\max_{i \ne t}( Z(x')_i) - Z(x')_t)^+$: - This formulation operates directly on logits (the output before the softmax layer), aiming to make the logit of the target class $t$ higher than any other class logit. It's a valid approach, especially under certain adversarial settings. 7. $f_{7}(x') = \text{softplus}(\max_{i \ne t}(Z(x')_i) - Z(x')_t)-\log(2)$: - Similar to $f_{3}$ but applied to logits. It's not inherently incorrect given the specification. Based on the analysis, equation $5$ stands out as incorrect due to its handling of probabilities that would lead to undefined or complex values. Therefore, the list of incorrect equations according to the specification is:
1 | [5] |
Resulting in output: False