Initial Query

What does the VPBROADCASTB instruction do?

LLM Generation

Query

What does the VPBROADCASTB instruction do?

Output

The `VPBROADCASTB` instruction is an AVX2 instruction in the x86 architecture that broadcasts the lower byte of a source operand to all bytes of a destination operand (vector register). In other words, it takes a single byte value from the source operand and replicates it across all bytes of the destination vector register. The source operand can be a general-purpose register or a memory location. The `VPBROADCASTB` instruction is useful for operations that require the same byte value to be replicated across multiple elements of a vector register, such as initializing a vector with a constant value or performing certain arithmetic or logical operations that involve a constant value. Here's the general syntax:

This instruction broadcasts the lower byte from the source operand `xmm2/m8` (which can be an XMM register or a memory location) to all bytes of the destination operand `xmm1` (an XMM register). For example, if the source operand contains the byte value `0x12`, the instruction would replicate this value across all bytes of the destination XMM register, effectively setting it to `0x12121212121212121212121212121212`. The `VPBROADCASTB` instruction is part of the AVX2 instruction set, which provides SIMD (Single Instruction, Multiple Data) operations on 256-bit vector registers, enabling efficient data-parallel computations on multiple data elements simultaneously.

LLM Generation

Query

Below is a student's answer to a question about what a particular instruction does: The `VPBROADCASTB` instruction is an AVX2 instruction in the x86 architecture that broadcasts the lower byte of a source operand to all bytes of a destination operand (vector register). In other words, it takes a single byte value from the source operand and replicates it across all bytes of the destination vector register. The source operand can be a general-purpose register or a memory location. The `VPBROADCASTB` instruction is useful for operations that require the same byte value to be replicated across multiple elements of a vector register, such as initializing a vector with a constant value or performing certain arithmetic or logical operations that involve a constant value. Here's the general syntax:

This instruction broadcasts the lower byte from the source operand `xmm2/m8` (which can be an XMM register or a memory location) to all bytes of the destination operand `xmm1` (an XMM register). For example, if the source operand contains the byte value `0x12`, the instruction would replicate this value across all bytes of the destination XMM register, effectively setting it to `0x12121212121212121212121212121212`. The `VPBROADCASTB` instruction is part of the AVX2 instruction set, which provides SIMD (Single Instruction, Multiple Data) operations on 256-bit vector registers, enabling efficient data-parallel computations on multiple data elements simultaneously. Does the student's say something similar to "Load integer data from the source operand (the second operand) and broadcast to all elements of the destination operand (the first operand)."? If the answer is correct say "The student passes" otherwise "The student fails".

Output

The student passes.

Substring Evaluation

Testing if the previous output contains the string student passes: True

Initial Query

What does the VPBROADCASTB instruction do?

LLM Generation

Query

What does the VPBROADCASTB instruction do?

Output

The `VPBROADCASTB` instruction is an AVX2 (Advanced Vector Extensions 2) instruction in the x86 architecture. It is used to broadcast (replicate) a single byte value across all elements of a vector register. The `VPBROADCASTB` instruction copies the value from a byte memory location or the low byte of a general-purpose register and broadcasts (replicates) it to all bytes in the destination vector register. The syntax for the `VPBROADCASTB` instruction is as follows:

Where: - `xmm1` is the destination vector register (128-bit or 256-bit, depending on the instruction form). - `r/m8` is the source byte memory location or the low byte of a general-purpose register. After executing the `VPBROADCASTB` instruction, all bytes in the destination vector register `xmm1` will be filled with the value from the source byte. This instruction is useful for operations that require the same byte value to be used across all elements of a vector register, such as initializing a vector with a constant value or performing certain SIMD (Single Instruction, Multiple Data) operations. The `VPBROADCASTB` instruction is part of the AVX2 instruction set, which provides improved performance for various SIMD operations compared to the older SSE and AVX instruction sets.

LLM Generation

Query

Below is a student's answer to a question about what a particular instruction does: The `VPBROADCASTB` instruction is an AVX2 (Advanced Vector Extensions 2) instruction in the x86 architecture. It is used to broadcast (replicate) a single byte value across all elements of a vector register. The `VPBROADCASTB` instruction copies the value from a byte memory location or the low byte of a general-purpose register and broadcasts (replicates) it to all bytes in the destination vector register. The syntax for the `VPBROADCASTB` instruction is as follows:

Where: - `xmm1` is the destination vector register (128-bit or 256-bit, depending on the instruction form). - `r/m8` is the source byte memory location or the low byte of a general-purpose register. After executing the `VPBROADCASTB` instruction, all bytes in the destination vector register `xmm1` will be filled with the value from the source byte. This instruction is useful for operations that require the same byte value to be used across all elements of a vector register, such as initializing a vector with a constant value or performing certain SIMD (Single Instruction, Multiple Data) operations. The `VPBROADCASTB` instruction is part of the AVX2 instruction set, which provides improved performance for various SIMD operations compared to the older SSE and AVX instruction sets. Does the student's say something similar to "Load integer data from the source operand (the second operand) and broadcast to all elements of the destination operand (the first operand)."? If the answer is correct say "The student passes" otherwise "The student fails".

Output

The student passes.

Substring Evaluation

Testing if the previous output contains the string student passes: True

Initial Query

What does the VPBROADCASTB instruction do?

LLM Generation

Query

What does the VPBROADCASTB instruction do?

Output

The `VPBROADCASTB` instruction is an AVX2 (Advanced Vector Extensions 2) instruction in x86 architecture, introduced with the Intel Haswell microarchitecture. It is used for data broadcast operations in SIMD (Single Instruction Multiple Data) operations. The `VPBROADCASTB` instruction broadcasts the low byte of a source operand to all bytes in the destination operand, which is a vector register. In other words, it duplicates the value of the low byte across all bytes of the destination vector register. The syntax for the `VPBROADCASTB` instruction is:

Here, `xmm1` is the destination vector register, and `xmm2/m8` is the source operand, which can be either a vector register (`xmm2`) or a memory location (`m8`). The `VPBROADCASTB` instruction is useful in situations where you need to perform the same operation on multiple data elements with the same value. It can be more efficient than loading the same value multiple times or using other instructions to duplicate the value across the vector register. This instruction is commonly used in multimedia, graphics, and signal processing applications, where data-level parallelism can be exploited to improve performance.

LLM Generation

Query

Below is a student's answer to a question about what a particular instruction does: The `VPBROADCASTB` instruction is an AVX2 (Advanced Vector Extensions 2) instruction in x86 architecture, introduced with the Intel Haswell microarchitecture. It is used for data broadcast operations in SIMD (Single Instruction Multiple Data) operations. The `VPBROADCASTB` instruction broadcasts the low byte of a source operand to all bytes in the destination operand, which is a vector register. In other words, it duplicates the value of the low byte across all bytes of the destination vector register. The syntax for the `VPBROADCASTB` instruction is:

Here, `xmm1` is the destination vector register, and `xmm2/m8` is the source operand, which can be either a vector register (`xmm2`) or a memory location (`m8`). The `VPBROADCASTB` instruction is useful in situations where you need to perform the same operation on multiple data elements with the same value. It can be more efficient than loading the same value multiple times or using other instructions to duplicate the value across the vector register. This instruction is commonly used in multimedia, graphics, and signal processing applications, where data-level parallelism can be exploited to improve performance. Does the student's say something similar to "Load integer data from the source operand (the second operand) and broadcast to all elements of the destination operand (the first operand)."? If the answer is correct say "The student passes" otherwise "The student fails".

Output

The student passes.

Substring Evaluation

Testing if the previous output contains the string student passes: True

Initial Query

What does the VPBROADCASTB instruction do?

LLM Generation

Query

What does the VPBROADCASTB instruction do?

Output

The `VPBROADCASTB` instruction is an x86 instruction that is part of the AVX2 (Advanced Vector Extensions 2) instruction set. It is used for data manipulation in SIMD (Single Instruction, Multiple Data) operations. The `VPBROADCASTB` instruction broadcasts (replicates) the low byte value from the source operand to all bytes in the destination operand. In other words, it copies the value of the least significant byte of the source operand into all bytes of the destination operand. The instruction has the following syntax:

Here: - `xmm1` is the destination operand, which is an XMM register. - `xmm2/m8` is the source operand, which can be either an XMM register or a memory location. After the instruction is executed, all bytes in the destination operand (`xmm1`) will contain the value of the least significant byte from the source operand (`xmm2/m8`). This instruction is useful in scenarios where you need to perform the same operation on multiple data elements simultaneously, such as in multimedia or signal processing applications. For example, if you want to fill an XMM register with a specific byte value, you can load that byte value into another XMM register and then use the `VPBROADCASTB` instruction to broadcast it to all bytes of the destination register.

LLM Generation

Query

Below is a student's answer to a question about what a particular instruction does: The `VPBROADCASTB` instruction is an x86 instruction that is part of the AVX2 (Advanced Vector Extensions 2) instruction set. It is used for data manipulation in SIMD (Single Instruction, Multiple Data) operations. The `VPBROADCASTB` instruction broadcasts (replicates) the low byte value from the source operand to all bytes in the destination operand. In other words, it copies the value of the least significant byte of the source operand into all bytes of the destination operand. The instruction has the following syntax:

Here: - `xmm1` is the destination operand, which is an XMM register. - `xmm2/m8` is the source operand, which can be either an XMM register or a memory location. After the instruction is executed, all bytes in the destination operand (`xmm1`) will contain the value of the least significant byte from the source operand (`xmm2/m8`). This instruction is useful in scenarios where you need to perform the same operation on multiple data elements simultaneously, such as in multimedia or signal processing applications. For example, if you want to fill an XMM register with a specific byte value, you can load that byte value into another XMM register and then use the `VPBROADCASTB` instruction to broadcast it to all bytes of the destination register. Does the student's say something similar to "Load integer data from the source operand (the second operand) and broadcast to all elements of the destination operand (the first operand)."? If the answer is correct say "The student passes" otherwise "The student fails".

Output

The student passes.

Substring Evaluation

Testing if the previous output contains the string student passes: True

Initial Query

What does the VPBROADCASTB instruction do?

LLM Generation

Query

What does the VPBROADCASTB instruction do?

Output

The `VPBROADCASTB` instruction is an AVX2 instruction that broadcasts a byte value from a source operand to all bytes in the destination operand, which is a vector register (YMM or XMM register). In other words, it takes a single byte value from the specified source operand (which can be a general-purpose register or memory location) and duplicates it across all bytes in the destination vector register. The syntax for the `VPBROADCASTB` instruction is:

Here, `xmm1` or `ymm1` is the destination vector register, and `r/m8` is the source operand containing the byte value to be broadcasted. This instruction can be useful in various scenarios where you need to perform the same operation on multiple data elements using SIMD (Single Instruction, Multiple Data) operations. For example, it can be used for initializing vector registers with a constant value or for performing arithmetic operations where one operand is a constant. Note that the `VPBROADCASTB` instruction is part of the AVX2 instruction set, which is an extension to the AVX (Advanced Vector Extensions) instruction set in modern x86 processors. It requires a processor that supports AVX2 instructions.

LLM Generation

Query

Below is a student's answer to a question about what a particular instruction does: The `VPBROADCASTB` instruction is an AVX2 instruction that broadcasts a byte value from a source operand to all bytes in the destination operand, which is a vector register (YMM or XMM register). In other words, it takes a single byte value from the specified source operand (which can be a general-purpose register or memory location) and duplicates it across all bytes in the destination vector register. The syntax for the `VPBROADCASTB` instruction is:

Here, `xmm1` or `ymm1` is the destination vector register, and `r/m8` is the source operand containing the byte value to be broadcasted. This instruction can be useful in various scenarios where you need to perform the same operation on multiple data elements using SIMD (Single Instruction, Multiple Data) operations. For example, it can be used for initializing vector registers with a constant value or for performing arithmetic operations where one operand is a constant. Note that the `VPBROADCASTB` instruction is part of the AVX2 instruction set, which is an extension to the AVX (Advanced Vector Extensions) instruction set in modern x86 processors. It requires a processor that supports AVX2 instructions. Does the student's say something similar to "Load integer data from the source operand (the second operand) and broadcast to all elements of the destination operand (the first operand)."? If the answer is correct say "The student passes" otherwise "The student fails".

Output

The student passes.

Substring Evaluation

Testing if the previous output contains the string student passes: True