Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

You are in a repository with two files `a` and `b`. Make a new git repo and then commit them both. On each round you should just give me just one command to type, I'll run it, and give you the exact output. I'll get started: INPUT: `pwd` OUTPUT: `/usr/src/app` INPUT: `ls` OUTPUT: `main.py a b` Now your turn. What do you want to run? Do not explain yourself, just give me exactly one command. Start your response with INPUT:

Looping until done

Iteration 0

LLM Generation

Query

You are in a repository with two files `a` and `b`. Make a new git repo and then commit them both. On each round you should just give me just one command to type, I'll run it, and give you the exact output. I'll get started: INPUT: `pwd` OUTPUT: `/usr/src/app` INPUT: `ls` OUTPUT: `main.py a b` Now your turn. What do you want to run? Do not explain yourself, just give me exactly one command. Start your response with INPUT:

Output

INPUT: git init

PyFunc

Resulting in output: git init

Run Code Interpreter

Running the following program:

1
git init
And got the output: Initialized empty Git repository in /usr/src/app/.git/ hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch <name> hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m <name>

PyFunc

Resulting in output: OUTPUT: `Initialized empty Git repository in /usr/src/app/.git/ hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch <name> hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m <name> `. What command should I run next? Start your response with INPUT:

Iteration 1

LLM Generation

Query

OUTPUT: `Initialized empty Git repository in /usr/src/app/.git/ hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch <name> hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m <name> `. What command should I run next? Start your response with INPUT:

Output

INPUT: git add a b

PyFunc

Resulting in output: git add a b

Run Code Interpreter

Running the following program:

1
git add a b
And got the output:

PyFunc

Resulting in output: OUTPUT: ``. What command should I run next? Start your response with INPUT:

Iteration 2

LLM Generation

Query

OUTPUT: ``. What command should I run next? Start your response with INPUT:

Output

INPUT: git commit -m "Initial commit"

PyFunc

Resulting in output: git commit -m "Initial commit"

Run Code Interpreter

Running the following program:

1
git commit -m "Initial commit"
And got the output: [master (root-commit) b2fedf8] Initial commit 2 files changed, 2 insertions(+) create mode 100644 a create mode 100644 b

PyFunc

Resulting in output: OUTPUT: `[master (root-commit) b2fedf8] Initial commit 2 files changed, 2 insertions(+) create mode 100644 a create mode 100644 b `. What command should I run next? Start your response with INPUT:

PyFunc

final: True Resulting in output: True

Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

You are in a repository with two files `a` and `b`. Make a new git repo and then commit them both. On each round you should just give me just one command to type, I'll run it, and give you the exact output. I'll get started: INPUT: `pwd` OUTPUT: `/usr/src/app` INPUT: `ls` OUTPUT: `main.py a b` Now your turn. What do you want to run? Do not explain yourself, just give me exactly one command. Start your response with INPUT:

Looping until done

Iteration 0

LLM Generation

Query

You are in a repository with two files `a` and `b`. Make a new git repo and then commit them both. On each round you should just give me just one command to type, I'll run it, and give you the exact output. I'll get started: INPUT: `pwd` OUTPUT: `/usr/src/app` INPUT: `ls` OUTPUT: `main.py a b` Now your turn. What do you want to run? Do not explain yourself, just give me exactly one command. Start your response with INPUT:

Output

INPUT: git init

PyFunc

Resulting in output: git init

Run Code Interpreter

Running the following program:

1
git init
And got the output: Initialized empty Git repository in /usr/src/app/.git/ hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch <name> hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m <name>

PyFunc

Resulting in output: OUTPUT: `Initialized empty Git repository in /usr/src/app/.git/ hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch <name> hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m <name> `. What command should I run next? Start your response with INPUT:

Iteration 1

LLM Generation

Query

OUTPUT: `Initialized empty Git repository in /usr/src/app/.git/ hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch <name> hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m <name> `. What command should I run next? Start your response with INPUT:

Output

INPUT: git add a b

PyFunc

Resulting in output: git add a b

Run Code Interpreter

Running the following program:

1
git add a b
And got the output:

PyFunc

Resulting in output: OUTPUT: ``. What command should I run next? Start your response with INPUT:

Iteration 2

LLM Generation

Query

OUTPUT: ``. What command should I run next? Start your response with INPUT:

Output

INPUT: git commit -m "Add files a and b"

PyFunc

Resulting in output: git commit -m "Add files a and b"

Run Code Interpreter

Running the following program:

1
git commit -m "Add files a and b"
And got the output: [master (root-commit) 339c025] Add files a and b 2 files changed, 2 insertions(+) create mode 100644 a create mode 100644 b

PyFunc

Resulting in output: OUTPUT: `[master (root-commit) 339c025] Add files a and b 2 files changed, 2 insertions(+) create mode 100644 a create mode 100644 b `. What command should I run next? Start your response with INPUT:

PyFunc

final: True Resulting in output: True

Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

You are in a repository with two files `a` and `b`. Make a new git repo and then commit them both. On each round you should just give me just one command to type, I'll run it, and give you the exact output. I'll get started: INPUT: `pwd` OUTPUT: `/usr/src/app` INPUT: `ls` OUTPUT: `main.py a b` Now your turn. What do you want to run? Do not explain yourself, just give me exactly one command. Start your response with INPUT:

Looping until done

Iteration 0

LLM Generation

Query

You are in a repository with two files `a` and `b`. Make a new git repo and then commit them both. On each round you should just give me just one command to type, I'll run it, and give you the exact output. I'll get started: INPUT: `pwd` OUTPUT: `/usr/src/app` INPUT: `ls` OUTPUT: `main.py a b` Now your turn. What do you want to run? Do not explain yourself, just give me exactly one command. Start your response with INPUT:

Output

INPUT: git init

PyFunc

Resulting in output: git init

Run Code Interpreter

Running the following program:

1
git init
And got the output: Initialized empty Git repository in /usr/src/app/.git/ hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch <name> hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m <name>

PyFunc

Resulting in output: OUTPUT: `Initialized empty Git repository in /usr/src/app/.git/ hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch <name> hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m <name> `. What command should I run next? Start your response with INPUT:

Iteration 1

LLM Generation

Query

OUTPUT: `Initialized empty Git repository in /usr/src/app/.git/ hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch <name> hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m <name> `. What command should I run next? Start your response with INPUT:

Output

INPUT: git add a b

PyFunc

Resulting in output: git add a b

Run Code Interpreter

Running the following program:

1
git add a b
And got the output:

PyFunc

Resulting in output: OUTPUT: ``. What command should I run next? Start your response with INPUT:

Iteration 2

LLM Generation

Query

OUTPUT: ``. What command should I run next? Start your response with INPUT:

Output

INPUT: git commit -m "Initial commit"

PyFunc

Resulting in output: git commit -m "Initial commit"

Run Code Interpreter

Running the following program:

1
git commit -m "Initial commit"
And got the output: [master (root-commit) 879daa6] Initial commit 2 files changed, 2 insertions(+) create mode 100644 a create mode 100644 b

PyFunc

Resulting in output: OUTPUT: `[master (root-commit) 879daa6] Initial commit 2 files changed, 2 insertions(+) create mode 100644 a create mode 100644 b `. What command should I run next? Start your response with INPUT:

PyFunc

final: True Resulting in output: True

Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

You are in a repository with two files `a` and `b`. Make a new git repo and then commit them both. On each round you should just give me just one command to type, I'll run it, and give you the exact output. I'll get started: INPUT: `pwd` OUTPUT: `/usr/src/app` INPUT: `ls` OUTPUT: `main.py a b` Now your turn. What do you want to run? Do not explain yourself, just give me exactly one command. Start your response with INPUT:

Looping until done

Iteration 0

LLM Generation

Query

You are in a repository with two files `a` and `b`. Make a new git repo and then commit them both. On each round you should just give me just one command to type, I'll run it, and give you the exact output. I'll get started: INPUT: `pwd` OUTPUT: `/usr/src/app` INPUT: `ls` OUTPUT: `main.py a b` Now your turn. What do you want to run? Do not explain yourself, just give me exactly one command. Start your response with INPUT:

Output

INPUT: git init

PyFunc

Resulting in output: git init

Run Code Interpreter

Running the following program:

1
git init
And got the output: Initialized empty Git repository in /usr/src/app/.git/ hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch <name> hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m <name>

PyFunc

Resulting in output: OUTPUT: `Initialized empty Git repository in /usr/src/app/.git/ hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch <name> hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m <name> `. What command should I run next? Start your response with INPUT:

Iteration 1

LLM Generation

Query

OUTPUT: `Initialized empty Git repository in /usr/src/app/.git/ hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch <name> hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m <name> `. What command should I run next? Start your response with INPUT:

Output

INPUT: git add a b

PyFunc

Resulting in output: git add a b

Run Code Interpreter

Running the following program:

1
git add a b
And got the output:

PyFunc

Resulting in output: OUTPUT: ``. What command should I run next? Start your response with INPUT:

Iteration 2

LLM Generation

Query

OUTPUT: ``. What command should I run next? Start your response with INPUT:

Output

INPUT: git commit -m "Initial commit"

PyFunc

Resulting in output: git commit -m "Initial commit"

Run Code Interpreter

Running the following program:

1
git commit -m "Initial commit"
And got the output: [master (root-commit) 5c75909] Initial commit 2 files changed, 2 insertions(+) create mode 100644 a create mode 100644 b

PyFunc

Resulting in output: OUTPUT: `[master (root-commit) 5c75909] Initial commit 2 files changed, 2 insertions(+) create mode 100644 a create mode 100644 b `. What command should I run next? Start your response with INPUT:

PyFunc

final: True Resulting in output: True

Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

You are in a repository with two files `a` and `b`. Make a new git repo and then commit them both. On each round you should just give me just one command to type, I'll run it, and give you the exact output. I'll get started: INPUT: `pwd` OUTPUT: `/usr/src/app` INPUT: `ls` OUTPUT: `main.py a b` Now your turn. What do you want to run? Do not explain yourself, just give me exactly one command. Start your response with INPUT:

Looping until done

Iteration 0

LLM Generation

Query

You are in a repository with two files `a` and `b`. Make a new git repo and then commit them both. On each round you should just give me just one command to type, I'll run it, and give you the exact output. I'll get started: INPUT: `pwd` OUTPUT: `/usr/src/app` INPUT: `ls` OUTPUT: `main.py a b` Now your turn. What do you want to run? Do not explain yourself, just give me exactly one command. Start your response with INPUT:

Output

INPUT: git init

PyFunc

Resulting in output: git init

Run Code Interpreter

Running the following program:

1
git init
And got the output: Initialized empty Git repository in /usr/src/app/.git/ hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch <name> hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m <name>

PyFunc

Resulting in output: OUTPUT: `Initialized empty Git repository in /usr/src/app/.git/ hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch <name> hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m <name> `. What command should I run next? Start your response with INPUT:

Iteration 1

LLM Generation

Query

OUTPUT: `Initialized empty Git repository in /usr/src/app/.git/ hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch <name> hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m <name> `. What command should I run next? Start your response with INPUT:

Output

INPUT: git add a b

PyFunc

Resulting in output: git add a b

Run Code Interpreter

Running the following program:

1
git add a b
And got the output:

PyFunc

Resulting in output: OUTPUT: ``. What command should I run next? Start your response with INPUT:

Iteration 2

LLM Generation

Query

OUTPUT: ``. What command should I run next? Start your response with INPUT:

Output

INPUT: git commit -m "Initial commit"

PyFunc

Resulting in output: git commit -m "Initial commit"

Run Code Interpreter

Running the following program:

1
git commit -m "Initial commit"
And got the output: [master (root-commit) 10513ff] Initial commit 2 files changed, 2 insertions(+) create mode 100644 a create mode 100644 b

PyFunc

Resulting in output: OUTPUT: `[master (root-commit) 10513ff] Initial commit 2 files changed, 2 insertions(+) create mode 100644 a create mode 100644 b `. What command should I run next? Start your response with INPUT:

PyFunc

final: True Resulting in output: True