Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

LLM Generation

Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

Output

Here's a bash script that will rename all files of the form "merged_*" to "finished_*" in the given directory: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
#!/bin/bash

# Check if the correct number of arguments are provided
if [ "$#" -ne 1 ]; then
    echo "Usage: $0 <path/to/files>"
    exit 1
fi

# Set the path to the directory containing the files to be renamed
path="$1"

# Check if the directory exists
if [ ! -d "$path" ]; then
    echo "Error: Directory $path does not exist"
    exit 1
fi

# Rename all files of the form "merged_*" to "finished_*" in the given directory
for file in "$path"/merged_*; do
    # Check if the file exists
    if [ -f "$file" ]; then
        # Rename the file
        new_file="$path/finished_${file#$path/merged_}"
        mv "$file" "$new_file"
    fi
done

# Print a success message
echo "All files of the form 'merged_*' have been renamed to 'finished_*'"
Save this script to a file named `rename.sh` and make it executable by running the following command: 
1
chmod +x rename.sh
You can then call the script by running the following command: 
1
bash rename.sh /path/to/files
Replace `/path/to/files` with the path to the directory containing the files that you want to rename. I hope this helps! Let me know if you have any questions.

Extract Code

I extracted the following code from that output: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
#!/bin/bash

# Set the path to the directory containing the files to be renamed
path="$1"

# Check if the directory exists
if [ ! -d "$path" ]; then
    echo "Error: Directory $path does not exist"
    exit 1
fi

# Rename all files of the form "merged_*" to "finished_*" in the given directory
for file in "$path"/merged_*; do
    # Check if the file exists
    if [ -f "$file" ]; then
        # Rename the file
        new_file="$path/finished_${file#$path/merged_}"
        mv "$file" "$new_file"
    fi
done

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
#!/bin/bash

# Set the path to the directory containing the files to be renamed
path="$1"

# Check if the directory exists
if [ ! -d "$path" ]; then
    echo "Error: Directory $path does not exist"
    exit 1
fi

# Rename all files of the form "merged_*" to "finished_*" in the given directory
for file in "$path"/merged_*; do
    # Check if the file exists
    if [ -f "$file" ]; then
        # Rename the file
        new_file="$path/finished_${file#$path/merged_}"
        mv "$file" "$new_file"
    fi
done
And got the output:

PyFunc

final: True Resulting in output: True

Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

LLM Generation

Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

Output

Here's a simple bash script that should do what you're asking for: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
#!/bin/bash

# Check if the correct number of arguments are passed
if [ "$#" -ne 1 ]; then
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Set the path to the files
path="$1"

# Loop through all files in the path that match the pattern "merged_*"
for file in "$path"/merged_*; do
    # Check if the file exists
    if [ -e "$file" ]; then
        # Rename the file to "finished_*"
        new_file="${file/merged/finished}"
        mv "$file" "$new_file"
        echo "Renamed $file to $new_file"
    else
        echo "File $file does not exist"
    fi
done
Save this script as `rename.sh` and make it executable with `chmod +x rename.sh`. Then, you can run it by using the command `bash rename.sh /path/to/files`. Note that this script will rename all files in the given path that start with `merged_` to `finished_`. If you want to only rename files in the current directory, you can remove the `$path/` prefix from the `for` loop and the `mv` command. Also note that if there are multiple files with the same base name (e.g., `merged_file1` and `merged_file2`), this script will rename them to `finished_file1` and `finished_file1`, respectively, which could result in file overwrite. You may want to add some additional logic to handle this case if necessary.

Extract Code

I extracted the following code from that output: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
#!/bin/bash

# Check if the correct number of arguments are passed
if [ "$#" -ne 1 ]; then
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Set the path to the files
path="$1"

# Loop through all files in the path that match the pattern "merged_*"
for file in "$path"/merged_*; do
    # Check if the file exists
    if [ -e "$file" ]; then
        # Rename the file to "finished_*"
        new_file="${file/merged/finished}"
        mv "$file" "$new_file"
        echo "Renamed $file to $new_file"
    else
        echo "File $file does not exist"
    fi
done

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
#!/bin/bash

# Check if the correct number of arguments are passed
if [ "$#" -ne 1 ]; then
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Set the path to the files
path="$1"

# Loop through all files in the path that match the pattern "merged_*"
for file in "$path"/merged_*; do
    # Check if the file exists
    if [ -e "$file" ]; then
        # Rename the file to "finished_*"
        new_file="${file/merged/finished}"
        mv "$file" "$new_file"
        echo "Renamed $file to $new_file"
    else
        echo "File $file does not exist"
    fi
done
And got the output: Renamed foo//merged_0 to foo//finished_0 Renamed foo//merged_1 to foo//finished_1 Renamed foo//merged_2 to foo//finished_2 Renamed foo//merged_3 to foo//finished_3 Renamed foo//merged_4 to foo//finished_4 Renamed foo//merged_5 to foo//finished_5 Renamed foo//merged_6 to foo//finished_6 Renamed foo//merged_7 to foo//finished_7 Renamed foo//merged_8 to foo//finished_8 Renamed foo//merged_9 to foo//finished_9

PyFunc

final: True Resulting in output: True

Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

LLM Generation

Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

Output

Here's a bash script that should accomplish the task you described: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
#!/bin/bash

# Check if the correct number of arguments are provided
if [ "$#" -ne 1 ]; then
  echo "Usage: $0 /path/to/files"
  exit 1
fi

# Set the input directory to the provided path
input_dir="$1"

# Check if the input directory exists
if [ ! -d "$input_dir" ]; then
  echo "Error: Directory $input_dir does not exist."
  exit 1
fi

# Iterate over all files in the input directory that match the pattern "merged_*"
for file in "$input_dir"/merged_.*; do
  # Check if the file actually exists
  if [ -e "$file" ]; then
    # Rename the file by replacing "merged_" with "finished_" in the filename
    mv "$file" "${file/merged_/finished_}"
  fi
done

# Print a success message
echo "All files of the form 'merged_*' have been renamed to 'finished_*' in the directory $input_dir."
To use this script, save it as `rename.sh` and make it executable with the command: 
1
chmod +x rename.sh
Then you can call it by running: 
1
bash rename.sh /path/to/files
This will rename all files of the form `merged_*` in the specified directory to `finished_*` . I hope this helps! Let me know if you have any questions or if you'd like further assistance.

Extract Code

I extracted the following code from that output: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
#!/bin/bash

# Check if the correct number of arguments are provided
if [ "$#" -ne 1 ]; then
  echo "Usage: $0 /path/to/files"
  exit 1
fi

# Set the input directory to the provided path
input_dir="$1"

# Check if the input directory exists
if [ ! -d "$input_dir" ]; then
  echo "Error: Directory $input_dir does not exist."
  exit 1
fi

# Iterate over all files in the input directory that match the pattern "merged_*"
for file in "$input_dir"/merged_.*; do
  # Check if the file actually exists
  if [ -e "$file" ]; then
    # Rename the file by replacing "merged_" with "finished_" in the filename
    mv "$file" "${file/merged_/finished_}"
  fi
done

# Print a success message
echo "All files of the form 'merged_*' have been renamed to 'finished_*' in the directory $input_dir."

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
#!/bin/bash

# Check if the correct number of arguments are provided
if [ "$#" -ne 1 ]; then
  echo "Usage: $0 /path/to/files"
  exit 1
fi

# Set the input directory to the provided path
input_dir="$1"

# Check if the input directory exists
if [ ! -d "$input_dir" ]; then
  echo "Error: Directory $input_dir does not exist."
  exit 1
fi

# Iterate over all files in the input directory that match the pattern "merged_*"
for file in "$input_dir"/merged_.*; do
  # Check if the file actually exists
  if [ -e "$file" ]; then
    # Rename the file by replacing "merged_" with "finished_" in the filename
    mv "$file" "${file/merged_/finished_}"
  fi
done

# Print a success message
echo "All files of the form 'merged_*' have been renamed to 'finished_*' in the directory $input_dir."
And got the output: All files of the form 'merged_*' have been renamed to 'finished_*' in the directory foo/.

PyFunc

final: False Resulting in output: False

Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

LLM Generation

Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

Output

Here's a bash script that renames all files of the form "merged\_*" to "finished\_*" in the provided directory: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
#!/bin/bash

# Check if the correct number of arguments are provided
if [ "$#" -ne 1 ]; then
  echo "Usage: $0 /path/to/files"
  exit 1
fi

# Set the directory path
dir_path="$1"

# Check if the directory exists
if [ ! -d "$dir_path" ]; then
  echo "Error: Directory $dir_path does not exist."
  exit 1
fi

# Rename the files
find "$dir_path" -type f -name "merged_*" -exec sh -c 'mv "$0" "${0/merged_/finished_}"' {} \;

echo "Renamed all files of the form 'merged_*' to 'finished_*'"
Save this script as `rename.sh`, and make it executable using: 
1
chmod +x rename.sh
Now you can run the script by providing the directory path as an argument: 
1
./rename.sh /path/to/files
This script uses the `find` command to search for files with the name pattern "merged\_*" and then renames them using the `mv` command. The `${0/merged_/finished_}` syntax is a bash parameter expansion used to replace the prefix "merged\_" with "finished\_".

Extract Code

I extracted the following code from that output: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
#!/bin/bash

if [ "$#" -ne 1 ]; then
  echo "Usage: $0 /path/to/files"
  exit 1
fi

dir_path="$1"

if [ ! -d "$dir_path" ]; then
  echo "Error: Directory $dir_path does not exist."
  exit 1
fi

find "$dir_path" -type f -name "merged_*" -exec sh -c 'mv "$0" "${0/merged_/finished_}"' {} \;

echo "Renamed all files of the form 'merged_*' to 'finished_*'"

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
#!/bin/bash

if [ "$#" -ne 1 ]; then
  echo "Usage: $0 /path/to/files"
  exit 1
fi

dir_path="$1"

if [ ! -d "$dir_path" ]; then
  echo "Error: Directory $dir_path does not exist."
  exit 1
fi

find "$dir_path" -type f -name "merged_*" -exec sh -c 'mv "$0" "${0/merged_/finished_}"' {} \;

echo "Renamed all files of the form 'merged_*' to 'finished_*'"
And got the output: Renamed all files of the form 'merged_*' to 'finished_*' foo/merged_8: 1: Bad substitution foo/merged_4: 1: Bad substitution foo/merged_5: 1: Bad substitution foo/merged_7: 1: Bad substitution foo/merged_6: 1: Bad substitution foo/merged_2: 1: Bad substitution foo/merged_1: 1: Bad substitution foo/merged_9: 1: Bad substitution foo/merged_3: 1: Bad substitution foo/merged_0: 1: Bad substitution

PyFunc

final: False Resulting in output: False

Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

LLM Generation

Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

Output

Here's a bash script that should do what you're asking for. Save it as `rename.sh` and make it executable with `chmod +x rename.sh`. 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
#!/bin/bash

# Check if the correct number of arguments are provided
if [ "$#" -ne 1 ]; then
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Set the path to the directory containing the files
path="$1"

# Rename all files of the form "merged_*" to "finished_*" in the given directory
find "$path" -type f -name 'merged_*' -exec sh -c 'mv "$0" "${0/merged/finished}"' {} \;
Now you can call the script by running `bash rename.sh /path/to/files`. The script will rename all files in the specified directory (and its subdirectories) that match the pattern "merged\_*" to "finished\_*". Note: Be aware that this script will rename all matching files in the specified directory and its subdirectories. Make sure you're working with the correct directory before running the script.

Extract Code

I extracted the following code from that output: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
#!/bin/bash

# Check if the correct number of arguments are provided
if [ "$#" -ne 1 ]; then
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Set the path to the directory containing the files
path="$1"

# Rename all files of the form "merged_*" to "finished_*" in the given directory
find "$path" -type f -name 'merged_*' -exec sh -c 'mv "$0" "${0/merged/finished}"' {} \;

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
#!/bin/bash

# Check if the correct number of arguments are provided
if [ "$#" -ne 1 ]; then
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Set the path to the directory containing the files
path="$1"

# Rename all files of the form "merged_*" to "finished_*" in the given directory
find "$path" -type f -name 'merged_*' -exec sh -c 'mv "$0" "${0/merged/finished}"' {} \;
And got the output: foo/merged_8: 1: Bad substitution foo/merged_4: 1: Bad substitution foo/merged_5: 1: Bad substitution foo/merged_7: 1: Bad substitution foo/merged_6: 1: Bad substitution foo/merged_2: 1: Bad substitution foo/merged_1: 1: Bad substitution foo/merged_9: 1: Bad substitution foo/merged_3: 1: Bad substitution foo/merged_0: 1: Bad substitution

PyFunc

final: False Resulting in output: False