Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

LLM Generation

Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

Output

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
#!/bin/bash

# Check if a path is provided as an argument
if [ -z "$1" ]; then
  echo "Error: Please provide the path to the directory containing the files."
  exit 1
fi

# Store the path to the directory
directory="$1"

# Find all files in the directory starting with "merged_"
find "$directory" -name "merged_*" -print0 | while IFS= read -r -d $'\0' file; do
  # Extract the filename without the path
  filename=$(basename "$file")

  # Replace "merged_" with "finished_" in the filename
  new_filename="${filename/merged_/finished_}"

  # Rename the file
  mv -i "$file" "${directory}/${new_filename}"
done

echo "Rename complete!"
**Explanation:** 1. **Shebang:** `#!/bin/bash` specifies the script should be executed with bash. 2. **Argument Check:** - `if [ -z "$1" ]`: Checks if the first argument ($1) is empty. - If empty, prints an error message and exits. 3. **Storing the Path:** `directory="$1"` stores the provided path in the `directory` variable. 4. **Finding Files:** - `find "$directory" -name "merged_*" -print0`: Finds all files within the provided directory that start with "merged_". - `-print0`: Prints the filenames separated by null characters to handle filenames with spaces or special characters. 5. **Looping Through Files:** - `while IFS= read -r -d $'\0' file`: Reads the filenames from the `find` command output. - `IFS= read -r -d $'\0'`: Sets the Internal Field Separator (IFS) to null, reads each line raw (-r), and uses null as the delimiter (-d $'\0'). 6. **Renaming:** - `filename=$(basename "$file")`: Extracts the filename without the path. - `new_filename="${filename/merged_/finished_}"`: Uses bash parameter expansion to replace "merged_" with "finished_" in the filename. - `mv -i "$file" "${directory}/${new_filename}"`: Renames the file with the new name. `-i` prompts for confirmation before overwriting existing files. 7. **Completion Message:** Prints a message indicating the renaming process is complete. **To use the script:** 1. **Save** the code as `rename.sh`. 2. **Make it executable:** `chmod +x rename.sh` 3. **Run the script:** `bash rename.sh /path/to/files` (replace `/path/to/files` with the actual path to your files).

Extract Code

I extracted the following code from that output: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
#!/bin/bash

# Check if a path is provided as an argument
if [ -z "$1" ]; then
  echo "Error: Please provide the path to the directory containing the files."
  exit 1
fi

# Store the path to the directory
directory="$1"

# Find all files in the directory starting with "merged_"
find "$directory" -name "merged_*" -print0 | while IFS= read -r -d $'\0' file; do
  # Extract the filename without the path
  filename=$(basename "$file")

  # Replace "merged_" with "finished_" in the filename
  new_filename="${filename/merged_/finished_}"

  # Rename the file
  mv -i "$file" "${directory}/${new_filename}"
done

echo "Rename complete!"

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
#!/bin/bash

# Check if a path is provided as an argument
if [ -z "$1" ]; then
  echo "Error: Please provide the path to the directory containing the files."
  exit 1
fi

# Store the path to the directory
directory="$1"

# Find all files in the directory starting with "merged_"
find "$directory" -name "merged_*" -print0 | while IFS= read -r -d $'\0' file; do
  # Extract the filename without the path
  filename=$(basename "$file")

  # Replace "merged_" with "finished_" in the filename
  new_filename="${filename/merged_/finished_}"

  # Rename the file
  mv -i "$file" "${directory}/${new_filename}"
done

echo "Rename complete!"
And got the output: Rename complete!

PyFunc

final: True Resulting in output: True

Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

LLM Generation

Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

Output

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
#!/bin/bash

# Check if a directory path is provided as an argument
if [ -z "$1" ]; then
  echo "Error: Please provide the directory path as an argument."
  echo "Usage: $0 /path/to/files"
  exit 1
fi

# Set the directory path
directory="$1"

# Check if the provided path is a directory
if [ ! -d "$directory" ]; then
  echo "Error: '$directory' is not a valid directory."
  exit 1
fi

# Use find to locate and rename files
find "$directory" -type f -name "merged_*" -exec sh -c 'mv "$1" "${1/merged_/finished_}"' {} \;

echo "Rename complete!"
**Explanation:** 1. **Shebang:** `#!/bin/bash` ensures the script is executed with the Bash interpreter. 2. **Argument Handling:** - `if [ -z "$1" ]`: Checks if the first argument ($1) is empty. If so, it means no directory path was provided. - `echo "Error: ..."`: Prints an error message and usage instructions. - `exit 1`: Exits the script with an error code (1). 3. **Directory Check:** - `if [ ! -d "$directory" ]`: Checks if the provided path is a directory. If not, it prints an error and exits. 4. **File Renaming:** - `find "$directory" -type f -name "merged_*"`: - `find`: Searches for files within the specified directory (`$directory`). - `-type f`: Limits the search to regular files. - `-name "merged_*"`: Matches files starting with "merged_". - `-exec sh -c 'mv "$1" "${1/merged_/finished_}"' {} \;`: - `-exec`: Executes a command on each found file. - `sh -c '...'`: Runs the command within a subshell to handle spaces in filenames. - `mv "$1" "${1/merged_/finished_}"`: - `$1`: Represents the current file found by `find`. - `${1/merged_/finished_}`: Uses Bash string manipulation to replace "merged_" with "finished_" in the filename. - `mv`: Renames the file. 5. **Success Message:** `echo "Rename complete!"` prints a confirmation message. **How to Use:** 1. **Save the script:** Save the code as `rename.sh`. 2. **Make it executable:** `chmod +x rename.sh` 3. **Run the script:** `bash rename.sh /path/to/files`, replacing `/path/to/files` with the actual path to the directory containing your files.

Extract Code

I extracted the following code from that output: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
#!/bin/bash

# Check if a directory path is provided as an argument
if [ -z "$1" ]; then
  echo "Error: Please provide the directory path as an argument."
  echo "Usage: $0 /path/to/files"
  exit 1
fi

# Set the directory path
directory="$1"

# Check if the provided path is a directory
if [ ! -d "$directory" ]; then
  echo "Error: '$directory' is not a valid directory."
  exit 1
fi

# Use find to locate and rename files
find "$directory" -type f -name "merged_*" -exec sh -c 'mv "$1" "${1/merged_/finished_}"' {} \;

echo "Rename complete!"

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
#!/bin/bash

# Check if a directory path is provided as an argument
if [ -z "$1" ]; then
  echo "Error: Please provide the directory path as an argument."
  echo "Usage: $0 /path/to/files"
  exit 1
fi

# Set the directory path
directory="$1"

# Check if the provided path is a directory
if [ ! -d "$directory" ]; then
  echo "Error: '$directory' is not a valid directory."
  exit 1
fi

# Use find to locate and rename files
find "$directory" -type f -name "merged_*" -exec sh -c 'mv "$1" "${1/merged_/finished_}"' {} \;

echo "Rename complete!"
And got the output: Rename complete! foo/merged_8: 1: Bad substitution foo/merged_4: 1: Bad substitution foo/merged_5: 1: Bad substitution foo/merged_7: 1: Bad substitution foo/merged_6: 1: Bad substitution foo/merged_2: 1: Bad substitution foo/merged_1: 1: Bad substitution foo/merged_9: 1: Bad substitution foo/merged_3: 1: Bad substitution foo/merged_0: 1: Bad substitution

PyFunc

final: False Resulting in output: False

Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

LLM Generation

Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

Output

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
#!/bin/bash

# Check if a directory path is provided as an argument
if [ -z "$1" ]; then
  echo "Error: Please provide the directory path as an argument."
  echo "Usage: $0 /path/to/files"
  exit 1
fi

# Set the directory path from the argument
directory="$1"

# Check if the directory exists
if [ ! -d "$directory" ]; then
  echo "Error: Directory '$directory' does not exist."
  exit 1
fi

# Find all files starting with "merged_" in the directory and rename them
find "$directory" -type f -name "merged_*" -print0 | while IFS= read -r -d $'\0' file; do
  new_filename=$(echo "$file" | sed 's/merged_/finished_/')
  mv "$file" "$new_filename"
done

echo "Renamed all 'merged_*' files to 'finished_*' in '$directory'."
**How to use it:** 1. **Save the script:** Copy the code and save it to a file named `rename.sh`. 2. **Make it executable:** Open a terminal and run `chmod +x rename.sh`. 3. **Run the script:** Execute the script with the directory path as an argument: 
1
2
   bash rename.sh /path/to/files
Replace `/path/to/files` with the actual path to the directory containing the files you want to rename. **Explanation:** - **`#!/bin/bash`:** Specifies the script should be run with the Bash interpreter. - **`if [ -z "$1" ]`:** Checks if the first argument (`$1`) is empty. If it is, it means no directory path was provided. - **`directory="$1"`:** Assigns the first argument (the directory path) to the `directory` variable. - **`if [ ! -d "$directory" ]`:** Checks if the provided directory exists. - **`find ...`:** Finds all files ( `-type f`) in the specified directory that start with "merged_" ( `-name "merged_*"`) and prints their paths separated by null characters (`-print0`). - **`while IFS= read -r -d $'\0' file`:** Reads the output of `find` line by line, with each line representing a file path. - **`new_filename=$(echo "$file" | sed 's/merged_/finished_/'/)`:** Creates a new filename by replacing "merged_" with "finished_" using the `sed` command. - **`mv "$file" "$new_filename"`:** Renames the file from the original name (`$file`) to the new name (`$new_filename`). - **`echo "Renamed..."`:** Prints a confirmation message.

Extract Code

I extracted the following code from that output: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
#!/bin/bash

# Check if a directory path is provided as an argument
if [ -z "$1" ]; then
  echo "Error: Please provide the directory path as an argument."
  echo "Usage: $0 /path/to/files"
  exit 1
fi

# Set the directory path from the argument
directory="$1"

# Check if the directory exists
if [ ! -d "$directory" ]; then
  echo "Error: Directory '$directory' does not exist."
  exit 1
fi

# Find all files starting with "merged_" in the directory and rename them
find "$directory" -type f -name "merged_*" -print0 | while IFS= read -r -d $'\0' file; do
  new_filename=$(echo "$file" | sed 's/merged_/finished_/')
  mv "$file" "$new_filename"
done

echo "Renamed all 'merged_*' files to 'finished_*' in '$directory'."

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
#!/bin/bash

# Check if a directory path is provided as an argument
if [ -z "$1" ]; then
  echo "Error: Please provide the directory path as an argument."
  echo "Usage: $0 /path/to/files"
  exit 1
fi

# Set the directory path from the argument
directory="$1"

# Check if the directory exists
if [ ! -d "$directory" ]; then
  echo "Error: Directory '$directory' does not exist."
  exit 1
fi

# Find all files starting with "merged_" in the directory and rename them
find "$directory" -type f -name "merged_*" -print0 | while IFS= read -r -d $'\0' file; do
  new_filename=$(echo "$file" | sed 's/merged_/finished_/')
  mv "$file" "$new_filename"
done

echo "Renamed all 'merged_*' files to 'finished_*' in '$directory'."
And got the output: Renamed all 'merged_*' files to 'finished_*' in 'foo/'.

PyFunc

final: True Resulting in output: True

Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

LLM Generation

Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

Output

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
#!/bin/bash

# Check if a directory path is provided as an argument
if [ -z "$1" ]; then
  echo "Error: Please provide the directory path as an argument."
  echo "Usage: $0 /path/to/files"
  exit 1
fi

# Set the directory path
directory="$1"

# Check if the provided path is a directory
if [ ! -d "$directory" ]; then
  echo "Error: '$directory' is not a valid directory."
  exit 1
fi

# Use find to locate and rename files
find "$directory" -type f -name "merged_*" -exec sh -c 'mv "$0" "${0/merged_/finished_}"' {} \;

echo "Renamed all files starting with 'merged_' to 'finished_' in '$directory'"
**Explanation:** 1. **Shebang:** `#!/bin/bash` ensures the script is executed with Bash. 2. **Argument Handling:** - `if [ -z "$1" ]`: Checks if the first argument ($1) is empty (no directory provided). - `echo "Error: ..."`: Prints an error message and usage instructions if no directory is provided. - `exit 1`: Exits the script with an error code if no directory is provided. 3. **Directory Validation:** - `if [ ! -d "$directory" ]`: Checks if the provided path is not a directory. - `echo "Error: ..."`: Prints an error message if the path is not a directory. - `exit 1`: Exits the script with an error code if the path is invalid. 4. **File Renaming:** - `find "$directory" ...`: Uses the `find` command to search for files in the specified directory. - `-type f`: Specifies searching for files only. - `-name "merged_*"`: Searches for files that start with "merged_". - `-exec sh -c '...' {} \;`: Executes the provided command for each found file. - `mv "$0" "${0/merged_/finished_}"`: The actual rename command. - `$0`: Represents the current file found by `find`. - `${0/merged_/finished_}`: Uses bash parameter expansion to replace "merged_" with "finished_" in the filename. 5. **Confirmation Message:** - `echo "Renamed all files ..."`: Prints a confirmation message after the renaming process. **How to use the script:** 1. **Save the script:** Save the code as `rename.sh`. 2. **Make it executable:** `chmod +x rename.sh` 3. **Run the script:** `bash rename.sh /path/to/files` (replace `/path/to/files` with the actual path to your files). This script will find all files in the specified directory that start with "merged_" and rename them to start with "finished_", preserving the rest of the filename.

Extract Code

I extracted the following code from that output: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
#!/bin/bash

# Check if a directory path is provided as an argument
if [ -z "$1" ]; then
  echo "Error: Please provide the directory path as an argument."
  echo "Usage: $0 /path/to/files"
  exit 1
fi

# Set the directory path
directory="$1"

# Check if the provided path is a directory
if [ ! -d "$directory" ]; then
  echo "Error: '$directory' is not a valid directory."
  exit 1
fi

# Use find to locate and rename files
find "$directory" -type f -name "merged_*" -exec sh -c 'mv "$0" "${0/merged_/finished_}"' {} \;

echo "Renamed all files starting with 'merged_' to 'finished_' in '$directory'"

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
#!/bin/bash

# Check if a directory path is provided as an argument
if [ -z "$1" ]; then
  echo "Error: Please provide the directory path as an argument."
  echo "Usage: $0 /path/to/files"
  exit 1
fi

# Set the directory path
directory="$1"

# Check if the provided path is a directory
if [ ! -d "$directory" ]; then
  echo "Error: '$directory' is not a valid directory."
  exit 1
fi

# Use find to locate and rename files
find "$directory" -type f -name "merged_*" -exec sh -c 'mv "$0" "${0/merged_/finished_}"' {} \;

echo "Renamed all files starting with 'merged_' to 'finished_' in '$directory'"
And got the output: Renamed all files starting with 'merged_' to 'finished_' in 'foo/' foo/merged_8: 1: Bad substitution foo/merged_4: 1: Bad substitution foo/merged_5: 1: Bad substitution foo/merged_7: 1: Bad substitution foo/merged_6: 1: Bad substitution foo/merged_2: 1: Bad substitution foo/merged_1: 1: Bad substitution foo/merged_9: 1: Bad substitution foo/merged_3: 1: Bad substitution foo/merged_0: 1: Bad substitution

PyFunc

final: False Resulting in output: False

Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

LLM Generation

Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

Output

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
#!/bin/bash

# Check if a path is provided as an argument
if [ -z "$1" ]; then
  echo "Usage: $0 /path/to/files"
  exit 1
fi

# Set the directory containing the files
directory="$1"

# Use find to locate and rename files
find "$directory" -name "merged_*" -print0 | while IFS= read -r -d $'\0' file; do
  new_filename="${file/merged_/finished_}"
  mv "$file" "$new_filename"
done
**Explanation:** 1. **Shebang:** `#!/bin/bash` ensures the script is executed by the Bash interpreter. 2. **Argument Check:** - `if [ -z "$1" ]; then ... fi` checks if the first argument (`$1`) is empty. If so, it prints a usage message and exits. 3. **Directory Assignment:** `directory="$1"` stores the provided path in the `directory` variable. 4. **File Renaming:** - `find "$directory" -name "merged_*" -print0` searches for files within the specified directory that match the pattern "merged_*". The `-print0` option separates filenames with a null character to handle spaces and special characters in filenames correctly. - `while IFS= read -r -d $'\0' file; do ... done` loops through the found files: - `IFS= read -r -d $'\0' file` reads each filename from `find`'s output. - `new_filename="${file/merged_/finished_}"` uses parameter expansion to replace "merged_" with "finished_" in the filename, creating the new filename. - `mv "$file" "$new_filename"` renames the file using the `mv` command. **How to use the script:** 1. **Save the script:** Save the code as `rename.sh` in a directory you prefer. 2. **Make it executable:** `chmod +x rename.sh` 3. **Run the script:** `bash rename.sh /path/to/files`, replacing `/path/to/files` with the actual path to the directory containing your files. This script will rename all files starting with "merged_" to start with "finished_" in the specified directory.

Extract Code

I extracted the following code from that output: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
#!/bin/bash

# Check if a path is provided as an argument
if [ -z "$1" ]; then
  echo "Usage: $0 /path/to/files"
  exit 1
fi

# Set the directory containing the files
directory="$1"

# Use find to locate and rename files
find "$directory" -name "merged_*" -print0 | while IFS= read -r -d $'\0' file; do
  new_filename="${file/merged_/finished_}"
  mv "$file" "$new_filename"
done

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
#!/bin/bash

# Check if a path is provided as an argument
if [ -z "$1" ]; then
  echo "Usage: $0 /path/to/files"
  exit 1
fi

# Set the directory containing the files
directory="$1"

# Use find to locate and rename files
find "$directory" -name "merged_*" -print0 | while IFS= read -r -d $'\0' file; do
  new_filename="${file/merged_/finished_}"
  mv "$file" "$new_filename"
done
And got the output:

PyFunc

final: True Resulting in output: True