Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

LLM Generation

Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

Output

Sure, here's a bash script that will rename all files of the form "merged_*" to "finished_*" in the specified directory: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
#!/bin/bash

# Check if a directory path is provided
if [ -z "$1" ]; then
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Change to the specified directory
cd "$1" || exit 1

# Rename files
for file in merged_*; do
    if [ -f "$file" ]; then
        new_name="finished_${file#merged_}"
        mv "$file" "$new_name"
    fi
done

echo "Files renamed successfully."
Save this script to a file called `rename.sh` and make it executable with the following command: 
1
chmod +x rename.sh
To run the script, use the following command: 
1
bash rename.sh /path/to/files
Replace `/path/to/files` with the actual path to the directory containing the files you want to rename. Here's how the script works: 1. The script first checks if a directory path is provided as an argument. If not, it prints a usage message and exits with an error code of 1. 2. If a directory path is provided, the script changes the current working directory to the specified path using the `cd` command. 3. The script then uses a `for` loop to iterate over all files that start with "merged_". 4. For each file that matches the pattern, the script checks if it's a regular file (not a directory) using the `-f` test. 5. If the file is a regular file, the script constructs a new file name by replacing "merged_" with "finished_" using parameter expansion (`${file#merged_}`). 6. The script then renames the file using the `mv` command, moving from the old name to the new name. 7. After renaming all files, the script prints a success message. Note that if any of the commands fail (e.g., if the directory path is invalid or if there are permission issues), the script will exit with a non-zero exit code.

Extract Code

I extracted the following code from that output: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
#!/bin/bash

# Check if a directory path is provided
if [ -z "$1" ]; then
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Change to the specified directory
cd "$1" || exit 1

# Rename files
for file in merged_*; do
    if [ -f "$file" ]; then
        new_name="finished_${file#merged_}"
        mv "$file" "$new_name"
    fi
done

echo "Files renamed successfully."

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
#!/bin/bash

# Check if a directory path is provided
if [ -z "$1" ]; then
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Change to the specified directory
cd "$1" || exit 1

# Rename files
for file in merged_*; do
    if [ -f "$file" ]; then
        new_name="finished_${file#merged_}"
        mv "$file" "$new_name"
    fi
done

echo "Files renamed successfully."
And got the output: Files renamed successfully.

PyFunc

final: True Resulting in output: True

Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

LLM Generation

Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

Output

Sure, here's a bash script that you can save as `rename.sh` to rename all files of the form "merged_*" to "finished_*" in the specified directory: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
#!/bin/bash

# Check if the directory path is provided
if [ -z "$1" ]; then
    echo "Error: Please provide the directory path as an argument."
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Change to the specified directory
cd "$1" || { echo "Error: Directory not found."; exit 1; }

# Rename the files
for file in merged_*; do
    if [ -f "$file" ]; then
        new_name="finished_${file#merged_}"
        mv "$file" "$new_name"
    fi
done

echo "File renaming completed."
To use this script, save it as `rename.sh` in your desired location and make it executable with the following command: 
1
chmod +x rename.sh
Then, you can run the script with the directory path as an argument: 
1
bash rename.sh /path/to/files
Here's how the script works: 1. The script first checks if the directory path is provided as an argument. If not, it prints an error message and exits. 2. It changes the current working directory to the specified directory using the `cd` command. If the directory is not found, it prints an error message and exits. 3. The `for` loop iterates over all files starting with "merged_" in the directory. 4. For each matching file, the script constructs a new name by replacing "merged_" with "finished_" using the `${file#merged_}` parameter expansion. 5. The `mv` command is used to rename the file to the new name. 6. After renaming all files, the script prints a message indicating that the renaming process is completed. Note: Make sure to replace `/path/to/files` with the actual path to the directory where the files are located. Also, this script assumes that the files are in the specified directory and not in any subdirectories.

Extract Code

I extracted the following code from that output: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
#!/bin/bash

# Check if the directory path is provided
if [ -z "$1" ]; then
    echo "Error: Please provide the directory path as an argument."
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Change to the specified directory
cd "$1" || { echo "Error: Directory not found."; exit 1; }

# Rename the files
for file in merged_*; do
    if [ -f "$file" ]; then
        new_name="finished_${file#merged_}"
        mv "$file" "$new_name"
    fi
done

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
#!/bin/bash

# Check if the directory path is provided
if [ -z "$1" ]; then
    echo "Error: Please provide the directory path as an argument."
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Change to the specified directory
cd "$1" || { echo "Error: Directory not found."; exit 1; }

# Rename the files
for file in merged_*; do
    if [ -f "$file" ]; then
        new_name="finished_${file#merged_}"
        mv "$file" "$new_name"
    fi
done
And got the output:

PyFunc

final: True Resulting in output: True

Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

LLM Generation

Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

Output

Here's a bash script called `rename.sh` that will rename all files in the specified directory with the prefix `merged_` to have the prefix `finished_`: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
#!/bin/bash

# Check if a directory path is provided
if [ -z "$1" ]; then
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Change to the specified directory
cd "$1" || exit 1

# Rename files
for file in merged_*; do
    if [ -f "$file" ]; then
        new_name="finished_${file#merged_}"
        mv "$file" "$new_name"
    fi
done
To use this script, save it as `rename.sh` and make it executable with `chmod +x rename.sh`. Then, you can run it with the directory path as an argument: 
1
bash rename.sh /path/to/files
Here's how the script works: 1. The script first checks if a directory path is provided as an argument. If not, it prints a usage message and exits with a non-zero status. 2. If a directory path is provided, the script changes the current working directory to the specified path using `cd`. 3. The script then loops through all files in the current directory that start with `merged_` using the `for` loop and the globbing pattern `merged_*`. 4. For each file that matches the pattern and is a regular file (checked with `-f`), the script constructs a new name by replacing `merged_` with `finished_` using the parameter expansion `${file#merged_}`. 5. The script then renames the file using the `mv` command, moving it from the old name to the new name. Note that this script assumes that all files you want to rename start with `merged_`. If you have other files with that prefix that you don't want to rename, you may need to modify the script accordingly.

Extract Code

I extracted the following code from that output: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
#!/bin/bash

# Check if a directory path is provided
if [ -z "$1" ]; then
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Change to the specified directory
cd "$1" || exit 1

# Rename files
for file in merged_*; do
    if [ -f "$file" ]; then
        new_name="finished_${file#merged_}"
        mv "$file" "$new_name"
    fi
done

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
#!/bin/bash

# Check if a directory path is provided
if [ -z "$1" ]; then
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Change to the specified directory
cd "$1" || exit 1

# Rename files
for file in merged_*; do
    if [ -f "$file" ]; then
        new_name="finished_${file#merged_}"
        mv "$file" "$new_name"
    fi
done
And got the output:

PyFunc

final: True Resulting in output: True

Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

LLM Generation

Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

Output

Here's a bash script that will rename all files of the form "merged_*" to "finished_*" in the given directory: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
#!/bin/bash

# Check if the directory path is provided
if [ -z "$1" ]; then
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Change to the provided directory
cd "$1" || exit 1

# Loop through all files starting with "merged_"
for file in merged_*; do
    if [ -f "$file" ]; then
        # Rename the file, replacing "merged_" with "finished_"
        mv "$file" "finished_${file#merged_}"
    fi
done
Save this script as `rename.sh` and make it executable with `chmod +x rename.sh`. To run the script, use the following command: 
1
bash rename.sh /path/to/files
Replace `/path/to/files` with the actual directory path where the files are located. Here's how the script works: 1. The script first checks if a directory path is provided as an argument. If not, it prints a usage message and exits with an error. 2. It changes the current working directory to the provided directory path using `cd`. 3. The script then uses a `for` loop to iterate over all files starting with "merged_". 4. Inside the loop, it checks if the current item is a regular file using the `-f` condition. 5. If the item is a file, it uses the `mv` command to rename the file. The new name is constructed by replacing "merged_" with "finished_" from the original filename. Note: This script will only rename files starting with "merged_" within the specified directory. It won't rename files in subdirectories or follow symbolic links.

Extract Code

I extracted the following code from that output: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
#!/bin/bash

# Check if the directory path is provided
if [ -z "$1" ]; then
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Change to the provided directory
cd "$1" || exit 1

# Loop through all files starting with "merged_"
for file in merged_*; do
    if [ -f "$file" ]; then
        # Rename the file, replacing "merged_" with "finished_"
        mv "$file" "finished_${file#merged_}"
    fi
done

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
#!/bin/bash

# Check if the directory path is provided
if [ -z "$1" ]; then
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Change to the provided directory
cd "$1" || exit 1

# Loop through all files starting with "merged_"
for file in merged_*; do
    if [ -f "$file" ]; then
        # Rename the file, replacing "merged_" with "finished_"
        mv "$file" "finished_${file#merged_}"
    fi
done
And got the output:

PyFunc

final: True Resulting in output: True

Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

LLM Generation

Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

Output

Here's a bash script that will rename all files of the form "merged_*" to "finished_*" in the specified directory: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
#!/bin/bash

# Check if a directory path is provided
if [ "$#" -ne 1 ]; then
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Store the provided directory path
dir_path="$1"

# Change to the specified directory
cd "$dir_path" || exit 1

# Loop through each file and rename if it matches the pattern
for file in merged_*; do
    if [ -f "$file" ]; then
        new_name="finished_${file#merged_}"
        mv "$file" "$new_name"
        echo "Renamed $file to $new_name"
    fi
done
To use this script, save it as `rename.sh` and make it executable with `chmod +x rename.sh`. Then, you can run it with a directory path as an argument: 
1
bash rename.sh /path/to/files
Here's what the script does: 1. The script first checks if a directory path is provided as an argument. If not, it prints a usage message and exits with an error code. 2. The provided directory path is stored in the `dir_path` variable. 3. The script changes the current working directory to the specified `dir_path`. If the directory doesn't exist or the change fails, the script exits with an error. 4. The `for` loop iterates through each file in the current directory that matches the pattern `merged_*`. 5. For each matching file, the script checks if it is a regular file (not a directory or other type of file). 6. If it's a regular file, the script constructs a new name with the `finished_` prefix by removing `merged_` from the original filename using the `${file#merged_}` parameter expansion. 7. The `mv` command renames the original file to the new name. 8. A message is printed to confirm the renaming operation. Note that this script assumes that the files you want to rename are in the specified directory. If you want to include subdirectories as well, you can modify the loop to use the `find` command instead of globbing.

Extract Code

I extracted the following code from that output: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
#!/bin/bash

# Check if a directory path is provided
if [ "$#" -ne 1 ]; then
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Store the provided directory path
dir_path="$1"

# Change to the specified directory
cd "$dir_path" || exit 1

# Loop through each file and rename if it matches the pattern
for file in merged_*; do
    if [ -f "$file" ]; then
        new_name="finished_${file#merged_}"
        mv "$file" "$new_name"
        echo "Renamed $file to $new_name"
    fi
done

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
#!/bin/bash

# Check if a directory path is provided
if [ "$#" -ne 1 ]; then
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Store the provided directory path
dir_path="$1"

# Change to the specified directory
cd "$dir_path" || exit 1

# Loop through each file and rename if it matches the pattern
for file in merged_*; do
    if [ -f "$file" ]; then
        new_name="finished_${file#merged_}"
        mv "$file" "$new_name"
        echo "Renamed $file to $new_name"
    fi
done
And got the output: Renamed merged_0 to finished_0 Renamed merged_1 to finished_1 Renamed merged_2 to finished_2 Renamed merged_3 to finished_3 Renamed merged_4 to finished_4 Renamed merged_5 to finished_5 Renamed merged_6 to finished_6 Renamed merged_7 to finished_7 Renamed merged_8 to finished_8 Renamed merged_9 to finished_9

PyFunc

final: True Resulting in output: True