Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

LLM Generation

Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

Output

Here's a bash script that renames all files of the form "merged_*" to "finished_*" in the specified directory: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
#!/bin/bash

# Check if the directory path is provided as an argument
if [ $# -eq 0 ]; then
    echo "Please provide the directory path as an argument."
    exit 1
fi

# Store the directory path
directory="$1"

# Change to the specified directory
cd "$directory" || { echo "Failed to change to directory: $directory"; exit 1; }

# Rename files matching the pattern "merged_*" to "finished_*"
for file in merged_*; do
    if [ -e "$file" ]; then
        new_name="finished_${file#merged_}"
        mv "$file" "$new_name"
        echo "Renamed $file to $new_name"
    fi
done
Save this script as `rename.sh` and make it executable using the command: 
1
chmod +x rename.sh
To run the script, open a terminal and execute the following command: 
1
bash rename.sh /path/to/files
Replace `/path/to/files` with the actual directory path where the files are located. Here's how the script works: 1. It checks if the directory path is provided as a command-line argument. If not, it displays an error message and exits. 2. It stores the directory path in the `directory` variable. 3. It changes the current working directory to the specified directory using the `cd` command. If the directory change fails, it displays an error message and exits. 4. It uses a `for` loop to iterate over all files that match the pattern "merged_*". 5. For each matching file, it checks if the file exists using the `-e` condition. 6. If the file exists, it constructs the new filename by replacing "merged_" with "finished_" using parameter expansion (`${file#merged_}`). 7. It renames the file using the `mv` command and displays a message indicating the renaming operation. After running the script, all files in the specified directory that match the pattern "merged_*" will be renamed to "finished_*". Note: Make sure to provide the correct directory path as an argument when running the script. The script assumes that the files are located in the specified directory.

Extract Code

I extracted the following code from that output: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
#!/bin/bash

if [ $# -eq 0 ]; then
    echo "Please provide the directory path as an argument."
    exit 1
fi

directory="$1"

cd "$directory" || { echo "Failed to change to directory: $directory"; exit 1; }

for file in merged_*; do
    if [ -e "$file" ]; then
        new_name="finished_${file#merged_}"
        mv "$file" "$new_name"
        echo "Renamed $file to $new_name"
    fi
done

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
#!/bin/bash

if [ $# -eq 0 ]; then
    echo "Please provide the directory path as an argument."
    exit 1
fi

directory="$1"

cd "$directory" || { echo "Failed to change to directory: $directory"; exit 1; }

for file in merged_*; do
    if [ -e "$file" ]; then
        new_name="finished_${file#merged_}"
        mv "$file" "$new_name"
        echo "Renamed $file to $new_name"
    fi
done
And got the output: Renamed merged_0 to finished_0 Renamed merged_1 to finished_1 Renamed merged_2 to finished_2 Renamed merged_3 to finished_3 Renamed merged_4 to finished_4 Renamed merged_5 to finished_5 Renamed merged_6 to finished_6 Renamed merged_7 to finished_7 Renamed merged_8 to finished_8 Renamed merged_9 to finished_9

PyFunc

final: True Resulting in output: True

Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

LLM Generation

Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

Output

Here's a bash script that renames all files of the form "merged_*" to "finished_*" in a specified directory: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
#!/bin/bash

# Check if the directory path is provided as an argument
if [ $# -eq 0 ]; then
    echo "Please provide the directory path as an argument."
    exit 1
fi

# Get the directory path from the command line argument
directory="$1"

# Check if the directory exists
if [ ! -d "$directory" ]; then
    echo "Directory '$directory' does not exist."
    exit 1
fi

# Iterate over all files in the directory
for file in "$directory"/merged_*; do
    # Check if the file exists
    if [ -e "$file" ]; then
        # Extract the base name of the file (without the "merged_" prefix)
        base_name=$(basename "$file" | sed 's/^merged_//')
        
        # Construct the new file name with the "finished_" prefix
        new_name="$directory/finished_$base_name"
        
        # Rename the file
        mv "$file" "$new_name"
        echo "Renamed '$file' to '$new_name'"
    fi
done
To use this script, save it as `rename.sh` and make it executable using the following command: 
1
chmod +x rename.sh
Then, you can run the script by providing the directory path as an argument: 
1
bash rename.sh /path/to/files
The script does the following: 1. It checks if a directory path is provided as a command line argument. If not, it displays an error message and exits. 2. It assigns the directory path from the command line argument to the `directory` variable. 3. It checks if the specified directory exists. If not, it displays an error message and exits. 4. It iterates over all files in the directory that match the pattern "merged_*". 5. For each file, it checks if the file exists. 6. If the file exists, it extracts the base name of the file (without the "merged_" prefix) using the `basename` command and `sed` to remove the prefix. 7. It constructs the new file name by prepending "finished_" to the base name. 8. It renames the file using the `mv` command and displays a message indicating the renaming operation. Make sure to replace `/path/to/files` with the actual path to the directory containing the files you want to rename when running the script.

Extract Code

I extracted the following code from that output: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
#!/bin/bash

# Check if the directory path is provided as an argument
if [ $# -eq 0 ]; then
    echo "Please provide the directory path as an argument."
    exit 1
fi

# Get the directory path from the command line argument
directory="$1"

# Check if the directory exists
if [ ! -d "$directory" ]; then
    echo "Directory '$directory' does not exist."
    exit 1
fi

# Iterate over all files in the directory
for file in "$directory"/merged_*; do
    # Check if the file exists
    if [ -e "$file" ]; then
        # Extract the base name of the file (without the "merged_" prefix)
        base_name=$(basename "$file" | sed 's/^merged_//')
        
        # Construct the new file name with the "finished_" prefix
        new_name="$directory/finished_$base_name"
        
        # Rename the file
        mv "$file" "$new_name"
        echo "Renamed '$file' to '$new_name'"
    fi
done

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
#!/bin/bash

# Check if the directory path is provided as an argument
if [ $# -eq 0 ]; then
    echo "Please provide the directory path as an argument."
    exit 1
fi

# Get the directory path from the command line argument
directory="$1"

# Check if the directory exists
if [ ! -d "$directory" ]; then
    echo "Directory '$directory' does not exist."
    exit 1
fi

# Iterate over all files in the directory
for file in "$directory"/merged_*; do
    # Check if the file exists
    if [ -e "$file" ]; then
        # Extract the base name of the file (without the "merged_" prefix)
        base_name=$(basename "$file" | sed 's/^merged_//')
        
        # Construct the new file name with the "finished_" prefix
        new_name="$directory/finished_$base_name"
        
        # Rename the file
        mv "$file" "$new_name"
        echo "Renamed '$file' to '$new_name'"
    fi
done
And got the output: Renamed 'foo//merged_0' to 'foo//finished_0' Renamed 'foo//merged_1' to 'foo//finished_1' Renamed 'foo//merged_2' to 'foo//finished_2' Renamed 'foo//merged_3' to 'foo//finished_3' Renamed 'foo//merged_4' to 'foo//finished_4' Renamed 'foo//merged_5' to 'foo//finished_5' Renamed 'foo//merged_6' to 'foo//finished_6' Renamed 'foo//merged_7' to 'foo//finished_7' Renamed 'foo//merged_8' to 'foo//finished_8' Renamed 'foo//merged_9' to 'foo//finished_9'

PyFunc

final: True Resulting in output: True

Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

LLM Generation

Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

Output

Here's a bash script that renames all files of the form "merged_*" to "finished_*" in the specified directory: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
#!/bin/bash

# Check if the directory path is provided as an argument
if [ $# -eq 0 ]; then
    echo "Please provide the directory path as an argument."
    echo "Usage: bash rename.sh /path/to/files"
    exit 1
fi

# Store the directory path in a variable
directory="$1"

# Change to the specified directory
cd "$directory" || { echo "Directory not found: $directory"; exit 1; }

# Iterate over all files matching the pattern "merged_*"
for file in merged_*; do
    # Check if the file exists
    if [ -e "$file" ]; then
        # Extract the part after "merged_"
        suffix="${file#merged_}"
        
        # Rename the file by replacing "merged_" with "finished_"
        mv "$file" "finished_$suffix"
        echo "Renamed $file to finished_$suffix"
    fi
done
Here's how the script works: 1. The script first checks if a directory path is provided as an argument. If not, it displays a usage message and exits with an error code. 2. The provided directory path is stored in the `directory` variable. 3. The script changes the current directory to the specified directory using the `cd` command. If the directory doesn't exist, an error message is displayed, and the script exits with an error code. 4. The script uses a `for` loop to iterate over all files matching the pattern "merged_*" in the current directory. 5. For each file found, the script checks if the file exists using the `-e` condition. 6. If the file exists, the script extracts the part of the filename after "merged_" using the `${file#merged_}` syntax and stores it in the `suffix` variable. 7. The script then renames the file by replacing "merged_" with "finished_" using the `mv` command. It appends the `suffix` to "finished_" to form the new filename. 8. Finally, the script prints a message indicating the renaming of each file. To use this script, save it to a file named `rename.sh` and make it executable using the command `chmod +x rename.sh`. Then, you can run the script by providing the directory path as an argument: 
1
bash rename.sh /path/to/files
Replace `/path/to/files` with the actual directory path where your "merged_*" files are located. Note: Make sure to double-check the script and test it on a small subset of files before running it on a large number of files to avoid any unintended consequences.

Extract Code

I extracted the following code from that output: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
#!/bin/bash

# Check if the directory path is provided as an argument
if [ $# -eq 0 ]; then
    echo "Please provide the directory path as an argument."
    echo "Usage: bash rename.sh /path/to/files"
    exit 1
fi

# Store the directory path in a variable
directory="$1"

# Change to the specified directory
cd "$directory" || { echo "Directory not found: $directory"; exit 1; }

# Iterate over all files matching the pattern "merged_*"
for file in merged_*; do
    # Check if the file exists
    if [ -e "$file" ]; then
        # Extract the part after "merged_"
        suffix="${file#merged_}"
        
        # Rename the file by replacing "merged_" with "finished_"
        mv "$file" "finished_$suffix"
        echo "Renamed $file to finished_$suffix"
    fi
done

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
#!/bin/bash

# Check if the directory path is provided as an argument
if [ $# -eq 0 ]; then
    echo "Please provide the directory path as an argument."
    echo "Usage: bash rename.sh /path/to/files"
    exit 1
fi

# Store the directory path in a variable
directory="$1"

# Change to the specified directory
cd "$directory" || { echo "Directory not found: $directory"; exit 1; }

# Iterate over all files matching the pattern "merged_*"
for file in merged_*; do
    # Check if the file exists
    if [ -e "$file" ]; then
        # Extract the part after "merged_"
        suffix="${file#merged_}"
        
        # Rename the file by replacing "merged_" with "finished_"
        mv "$file" "finished_$suffix"
        echo "Renamed $file to finished_$suffix"
    fi
done
And got the output: Renamed merged_0 to finished_0 Renamed merged_1 to finished_1 Renamed merged_2 to finished_2 Renamed merged_3 to finished_3 Renamed merged_4 to finished_4 Renamed merged_5 to finished_5 Renamed merged_6 to finished_6 Renamed merged_7 to finished_7 Renamed merged_8 to finished_8 Renamed merged_9 to finished_9

PyFunc

final: True Resulting in output: True

Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

LLM Generation

Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

Output

Here's a bash script that renames all files of the form "merged_*" to "finished_*": 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
#!/bin/bash

# Check if the directory path is provided as an argument
if [ $# -eq 0 ]; then
  echo "Please provide the directory path as an argument."
  echo "Usage: bash rename.sh /path/to/files"
  exit 1
fi

# Store the directory path in a variable
directory="$1"

# Change to the specified directory
cd "$directory" || { echo "Directory not found: $directory"; exit 1; }

# Rename files matching the pattern "merged_*" to "finished_*"
for file in merged_*; do
  if [ -e "$file" ]; then
    new_name="finished_${file#merged_}"
    mv "$file" "$new_name"
    echo "Renamed $file to $new_name"
  fi
done
To use this script, save it as `rename.sh` and make it executable using the command: 
1
chmod +x rename.sh
Then you can run the script by providing the directory path as an argument: 
1
bash rename.sh /path/to/files
Here's how the script works: 1. It checks if the directory path is provided as an argument. If not, it displays a usage message and exits with an error code. 2. It stores the directory path in a variable called `directory`. 3. It changes the current directory to the specified `directory`. If the directory doesn't exist, it displays an error message and exits. 4. It uses a `for` loop to iterate over all files matching the pattern "merged_*" in the current directory. 5. For each file found, it checks if the file exists using the `-e` condition. 6. If the file exists, it constructs the new filename by replacing "merged_" with "finished_" using parameter expansion `${file#merged_}`. 7. It renames the file using the `mv` command and displays a message indicating the renaming operation. The script will rename all files in the specified directory that match the pattern "merged_*" to "finished_*". If no files match the pattern or the directory is empty, no renaming will occur.

Extract Code

I extracted the following code from that output: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
#!/bin/bash

if [ $# -eq 0 ]; then
  echo "Please provide the directory path as an argument."
  echo "Usage: bash rename.sh /path/to/files"
  exit 1
fi

directory="$1"

cd "$directory" || { echo "Directory not found: $directory"; exit 1; }

for file in merged_*; do
  if [ -e "$file" ]; then
    new_name="finished_${file#merged_}"
    mv "$file" "$new_name"
    echo "Renamed $file to $new_name"
  fi
done

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
#!/bin/bash

if [ $# -eq 0 ]; then
  echo "Please provide the directory path as an argument."
  echo "Usage: bash rename.sh /path/to/files"
  exit 1
fi

directory="$1"

cd "$directory" || { echo "Directory not found: $directory"; exit 1; }

for file in merged_*; do
  if [ -e "$file" ]; then
    new_name="finished_${file#merged_}"
    mv "$file" "$new_name"
    echo "Renamed $file to $new_name"
  fi
done
And got the output: Renamed merged_0 to finished_0 Renamed merged_1 to finished_1 Renamed merged_2 to finished_2 Renamed merged_3 to finished_3 Renamed merged_4 to finished_4 Renamed merged_5 to finished_5 Renamed merged_6 to finished_6 Renamed merged_7 to finished_7 Renamed merged_8 to finished_8 Renamed merged_9 to finished_9

PyFunc

final: True Resulting in output: True

Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

LLM Generation

Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

Output

Here's a bash script that renames all files of the form "merged_*" to "finished_*" based on the provided path: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
#!/bin/bash

# Check if the path is provided as an argument
if [ $# -eq 0 ]; then
  echo "Please provide the path to the files as an argument."
  exit 1
fi

# Get the path from the command-line argument
path=$1

# Check if the path exists
if [ ! -d "$path" ]; then
  echo "The provided path does not exist: $path"
  exit 1
fi

# Iterate over all files in the specified path
for file in "$path"/merged_*; do
  # Check if the file exists
  if [ -e "$file" ]; then
    # Extract the base name of the file (without the "merged_" prefix)
    base_name=$(basename "$file" | sed 's/^merged_//')
    
    # Rename the file by replacing "merged_" with "finished_"
    new_name="$path/finished_$base_name"
    mv "$file" "$new_name"
    
    echo "Renamed: $file -> $new_name"
  fi
done
To use this script: 1. Save the script to a file named `rename.sh`. 2. Open a terminal and navigate to the directory where the `rename.sh` file is located. 3. Make the script executable by running the following command: 
1
2
   chmod +x rename.sh
4. Run the script by providing the path to the directory containing the files as an argument: 
1
2
   bash rename.sh /path/to/files
Replace `/path/to/files` with the actual path to the directory where the files are located. The script will perform the following steps: 1. It checks if the path is provided as a command-line argument. If not, it displays an error message and exits. 2. It assigns the provided path to the `path` variable. 3. It checks if the provided path exists. If not, it displays an error message and exits. 4. It iterates over all files in the specified path that match the pattern "merged_*". 5. For each file, it extracts the base name of the file (without the "merged_" prefix) using the `basename` command and `sed`. 6. It renames the file by replacing "merged_" with "finished_" in the file name using the `mv` command. 7. It displays a message indicating the original file name and the new file name. The script will rename all files that match the pattern "merged_*" to "finished_*" in the specified directory. If no matching files are found, no renaming will occur.

Extract Code

I extracted the following code from that output: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
#!/bin/bash

if [ $# -eq 0 ]; then
  echo "Please provide the path to the files as an argument."
  exit 1
fi

path=$1

if [ ! -d "$path" ]; then
  echo "The provided path does not exist: $path"
  exit 1
fi

for file in "$path"/merged_*; do
  if [ -e "$file" ]; then
    base_name=$(basename "$file" | sed 's/^merged_//')
    
    new_name="$path/finished_$base_name"
    mv "$file" "$new_name"
    
    echo "Renamed: $file -> $new_name"
  fi
done

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
#!/bin/bash

if [ $# -eq 0 ]; then
  echo "Please provide the path to the files as an argument."
  exit 1
fi

path=$1

if [ ! -d "$path" ]; then
  echo "The provided path does not exist: $path"
  exit 1
fi

for file in "$path"/merged_*; do
  if [ -e "$file" ]; then
    base_name=$(basename "$file" | sed 's/^merged_//')
    
    new_name="$path/finished_$base_name"
    mv "$file" "$new_name"
    
    echo "Renamed: $file -> $new_name"
  fi
done
And got the output: Renamed: foo//merged_0 -> foo//finished_0 Renamed: foo//merged_1 -> foo//finished_1 Renamed: foo//merged_2 -> foo//finished_2 Renamed: foo//merged_3 -> foo//finished_3 Renamed: foo//merged_4 -> foo//finished_4 Renamed: foo//merged_5 -> foo//finished_5 Renamed: foo//merged_6 -> foo//finished_6 Renamed: foo//merged_7 -> foo//finished_7 Renamed: foo//merged_8 -> foo//finished_8 Renamed: foo//merged_9 -> foo//finished_9

PyFunc

final: True Resulting in output: True