Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

LLM Generation

Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

Output

# File Renaming Script Here's a bash script that will rename all files matching the pattern "merged_*" to "finished_*" in a specified directory: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
#!/bin/bash

# Check if a directory path is provided
if [ $# -ne 1 ]; then
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Validate that the provided path is a directory
if [ ! -d "$1" ]; then
    echo "Error: '$1' is not a directory"
    exit 2
fi

# Enable nullglob to handle the case where no files match
shopt -s nullglob

# Initialize counter
count=0

# Loop through files matching the pattern
for file in "$1"/merged_*; do
    # Skip if not a regular file
    if [ ! -f "$file" ]; then
        continue
    fi
    
    # Create new filename
    new_file="${file/merged_/finished_}"
    
    # Rename file
    mv "$file" "$new_file"
    echo "Renamed: $(basename "$file") -> $(basename "$new_file")"
    
    ((count++))
done

# Disable nullglob
shopt -u nullglob

# Provide feedback
if [ $count -eq 0 ]; then
    echo "No files matching 'merged_*' were found in $1."
else
    echo "Renaming complete! Renamed $count files."
fi
## How to Use 1. Save this script as `rename.sh` 2. Make it executable (optional): `chmod +x rename.sh` 3. Run it with the path to your files: `bash rename.sh /path/to/files` The script will: - Check if the provided path is valid - Find all files starting with "merged_" in that directory - Rename them to start with "finished_" instead - Show you which files were renamed - Report the total number of files processed

Extract Code

I extracted the following code from that output: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
#!/bin/bash

# Check if a directory path is provided
if [ $# -ne 1 ]; then
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Validate that the provided path is a directory
if [ ! -d "$1" ]; then
    echo "Error: '$1' is not a directory"
    exit 2
fi

# Enable nullglob to handle the case where no files match
shopt -s nullglob

# Initialize counter
count=0

# Loop through files matching the pattern
for file in "$1"/merged_*; do
    # Skip if not a regular file
    if [ ! -f "$file" ]; then
        continue
    fi
    
    # Create new filename
    new_file="${file/merged_/finished_}"
    
    # Rename file
    mv "$file" "$new_file"
    echo "Renamed: $(basename "$file") -> $(basename "$new_file")"
    
    ((count++))
done

# Disable nullglob
shopt -u nullglob

# Provide feedback
if [ $count -eq 0 ]; then
    echo "No files matching 'merged_*' were found in $1."
else
    echo "Renaming complete! Renamed $count files."
fi

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
#!/bin/bash

# Check if a directory path is provided
if [ $# -ne 1 ]; then
    echo "Usage: $0 /path/to/files"
    exit 1
fi

# Validate that the provided path is a directory
if [ ! -d "$1" ]; then
    echo "Error: '$1' is not a directory"
    exit 2
fi

# Enable nullglob to handle the case where no files match
shopt -s nullglob

# Initialize counter
count=0

# Loop through files matching the pattern
for file in "$1"/merged_*; do
    # Skip if not a regular file
    if [ ! -f "$file" ]; then
        continue
    fi
    
    # Create new filename
    new_file="${file/merged_/finished_}"
    
    # Rename file
    mv "$file" "$new_file"
    echo "Renamed: $(basename "$file") -> $(basename "$new_file")"
    
    ((count++))
done

# Disable nullglob
shopt -u nullglob

# Provide feedback
if [ $count -eq 0 ]; then
    echo "No files matching 'merged_*' were found in $1."
else
    echo "Renaming complete! Renamed $count files."
fi
And got the output: Renamed: merged_0 -> finished_0 Renamed: merged_1 -> finished_1 Renamed: merged_2 -> finished_2 Renamed: merged_3 -> finished_3 Renamed: merged_4 -> finished_4 Renamed: merged_5 -> finished_5 Renamed: merged_6 -> finished_6 Renamed: merged_7 -> finished_7 Renamed: merged_8 -> finished_8 Renamed: merged_9 -> finished_9 Renaming complete! Renamed 10 files.

PyFunc

final: True Resulting in output: True

Docker Setup

I have setup the docker container to run the model evaluation.

Initial Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

LLM Generation

Query

Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.

Output

# Bash Script to Rename Files from "merged_*" to "finished_*" Here's the `rename.sh` script that will rename all files with the pattern "merged_*" to "finished_*" in the specified directory: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
#!/bin/bash

# Check if a directory was provided
if [ $# -ne 1 ]; then
  echo "Usage: $0 /path/to/files"
  exit 1
fi

# Get the directory path from the command line argument
DIR="$1"

# Check if the directory exists
if [ ! -d "$DIR" ]; then
  echo "Error: Directory $DIR does not exist"
  exit 1
fi

# Enable nullglob to handle the case where no files match the pattern
shopt -s nullglob

# Find all files that start with "merged_" and rename them
found=0
for file in "$DIR"/merged_*; do
  # Extract the base name of the file
  base=$(basename "$file")
  # Create the new file name by replacing "merged_" with "finished_"
  newname="${base/merged_/finished_}"
  # Rename the file
  mv "$file" "$DIR/$newname"
  echo "Renamed: $file to $DIR/$newname"
  found=1
done

# Reset nullglob
shopt -u nullglob

if [ $found -eq 0 ]; then
  echo "No files matching 'merged_*' were found in $DIR"
else
  echo "Renaming complete!"
fi
## How to Use 1. Create a file named `rename.sh` and paste the above script into it 2. Make the script executable: `chmod +x rename.sh` 3. Run the script by providing the directory path: `bash rename.sh /path/to/files` The script will: - Check if the provided directory exists - Find all files starting with "merged_" in the directory - Rename each file to start with "finished_" instead - Display the renaming operations as they occur - Provide a summary message when complete

Extract Code

I extracted the following code from that output: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
#!/bin/bash

# Check if a directory was provided
if [ $# -ne 1 ]; then
  echo "Usage: $0 /path/to/files"
  exit 1
fi

# Get the directory path from the command line argument
DIR="$1"

# Check if the directory exists
if [ ! -d "$DIR" ]; then
  echo "Error: Directory $DIR does not exist"
  exit 1
fi

# Enable nullglob to handle the case where no files match the pattern
shopt -s nullglob

# Find all files that start with "merged_" and rename them
found=0
for file in "$DIR"/merged_*; do
  # Extract the base name of the file
  base=$(basename "$file")
  # Create the new file name by replacing "merged_" with "finished_"
  newname="${base/merged_/finished_}"
  # Rename the file
  mv "$file" "$DIR/$newname"
  echo "Renamed: $file to $DIR/$newname"
  found=1
done

# Reset nullglob
shopt -u nullglob

if [ $found -eq 0 ]; then
  echo "No files matching 'merged_*' were found in $DIR"
else
  echo "Renaming complete!"
fi

Run Code Interpreter

Running the following program: 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
#!/bin/bash

# Check if a directory was provided
if [ $# -ne 1 ]; then
  echo "Usage: $0 /path/to/files"
  exit 1
fi

# Get the directory path from the command line argument
DIR="$1"

# Check if the directory exists
if [ ! -d "$DIR" ]; then
  echo "Error: Directory $DIR does not exist"
  exit 1
fi

# Enable nullglob to handle the case where no files match the pattern
shopt -s nullglob

# Find all files that start with "merged_" and rename them
found=0
for file in "$DIR"/merged_*; do
  # Extract the base name of the file
  base=$(basename "$file")
  # Create the new file name by replacing "merged_" with "finished_"
  newname="${base/merged_/finished_}"
  # Rename the file
  mv "$file" "$DIR/$newname"
  echo "Renamed: $file to $DIR/$newname"
  found=1
done

# Reset nullglob
shopt -u nullglob

if [ $found -eq 0 ]; then
  echo "No files matching 'merged_*' were found in $DIR"
else
  echo "Renaming complete!"
fi
And got the output: Renamed: foo//merged_0 to foo//finished_0 Renamed: foo//merged_1 to foo//finished_1 Renamed: foo//merged_2 to foo//finished_2 Renamed: foo//merged_3 to foo//finished_3 Renamed: foo//merged_4 to foo//finished_4 Renamed: foo//merged_5 to foo//finished_5 Renamed: foo//merged_6 to foo//finished_6 Renamed: foo//merged_7 to foo//finished_7 Renamed: foo//merged_8 to foo//finished_8 Renamed: foo//merged_9 to foo//finished_9 Renaming complete!

PyFunc

final: True Resulting in output: True