I have setup the docker container to run the model evaluation.
Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.
Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.
Here's a bash script that will rename files from "merged_*" to "finished_*":
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 | #!/bin/bash # Check if directory path is provided if [ $# -ne 1 ]; then echo "Usage: $0 /path/to/files" exit 1 fi # Store the directory path DIR="$1" # Check if directory exists if [ ! -d "$DIR" ]; then echo "Error: Directory $DIR does not exist" exit 1 fi # Change to the specified directory cd "$DIR" # Loop through all files starting with "merged_" for file in merged_*; do # Check if files exist (to avoid error when no matches found) if [ -e "$file" ]; then # Create new filename by replacing "merged_" with "finished_" newname="${file/merged_/finished_}" # Rename the file mv "$file" "$newname" echo "Renamed: $file -> $newname" fi done |
1 | chmod +x rename.sh |
1 | bash rename.sh /path/to/files |
I extracted the following code from that output:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 | #!/bin/bash # Check if directory path is provided if [ $# -ne 1 ]; then echo "Usage: $0 /path/to/files" exit 1 fi # Store the directory path DIR="$1" # Check if directory exists if [ ! -d "$DIR" ]; then echo "Error: Directory $DIR does not exist" exit 1 fi # Change to the specified directory cd "$DIR" # Loop through all files starting with "merged_" for file in merged_*; do # Check if files exist (to avoid error when no matches found) if [ -e "$file" ]; then # Create new filename by replacing "merged_" with "finished_" newname="${file/merged_/finished_}" # Rename the file mv "$file" "$newname" echo "Renamed: $file -> $newname" fi done |
Running the following program:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 | #!/bin/bash # Check if directory path is provided if [ $# -ne 1 ]; then echo "Usage: $0 /path/to/files" exit 1 fi # Store the directory path DIR="$1" # Check if directory exists if [ ! -d "$DIR" ]; then echo "Error: Directory $DIR does not exist" exit 1 fi # Change to the specified directory cd "$DIR" # Loop through all files starting with "merged_" for file in merged_*; do # Check if files exist (to avoid error when no matches found) if [ -e "$file" ]; then # Create new filename by replacing "merged_" with "finished_" newname="${file/merged_/finished_}" # Rename the file mv "$file" "$newname" echo "Renamed: $file -> $newname" fi done |
Renamed: merged_0 -> finished_0
Renamed: merged_1 -> finished_1
Renamed: merged_2 -> finished_2
Renamed: merged_3 -> finished_3
Renamed: merged_4 -> finished_4
Renamed: merged_5 -> finished_5
Renamed: merged_6 -> finished_6
Renamed: merged_7 -> finished_7
Renamed: merged_8 -> finished_8
Renamed: merged_9 -> finished_9
final: True Resulting in output: True
I have setup the docker container to run the model evaluation.
Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.
Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.
Here's a bash script that renames files from "merged_*" to "finished_*":
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 | #!/bin/bash # Check if directory path is provided if [ $# -ne 1 ]; then echo "Usage: $0 /path/to/files" exit 1 fi # Store directory path DIR="$1" # Check if directory exists if [ ! -d "$DIR" ]; then echo "Error: Directory $DIR does not exist" exit 1 fi # Change to specified directory cd "$DIR" || exit 1 # Loop through all files starting with "merged_" for file in merged_*; do # Check if files exist matching the pattern if [ ! -e "$file" ]; then echo "No files found matching 'merged_*' pattern" exit 1 fi # Create new filename by replacing "merged_" with "finished_" newname="${file/merged_/finished_}" # Rename file mv "$file" "$newname" echo "Renamed: $file -> $newname" done |
1 | chmod +x rename.sh |
1 | bash rename.sh /path/to/files |
I extracted the following code from that output:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 | #!/bin/bash # Check if directory path is provided if [ $# -ne 1 ]; then echo "Usage: $0 /path/to/files" exit 1 fi # Store directory path DIR="$1" # Check if directory exists if [ ! -d "$DIR" ]; then echo "Error: Directory $DIR does not exist" exit 1 fi # Change to specified directory cd "$DIR" || exit 1 # Loop through all files starting with "merged_" for file in merged_*; do # Check if files exist matching the pattern if [ ! -e "$file" ]; then echo "No files found matching 'merged_*' pattern" exit 1 fi # Create new filename by replacing "merged_" with "finished_" newname="${file/merged_/finished_}" # Rename file mv "$file" "$newname" echo "Renamed: $file -> $newname" done |
Running the following program:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 | #!/bin/bash # Check if directory path is provided if [ $# -ne 1 ]; then echo "Usage: $0 /path/to/files" exit 1 fi # Store directory path DIR="$1" # Check if directory exists if [ ! -d "$DIR" ]; then echo "Error: Directory $DIR does not exist" exit 1 fi # Change to specified directory cd "$DIR" || exit 1 # Loop through all files starting with "merged_" for file in merged_*; do # Check if files exist matching the pattern if [ ! -e "$file" ]; then echo "No files found matching 'merged_*' pattern" exit 1 fi # Create new filename by replacing "merged_" with "finished_" newname="${file/merged_/finished_}" # Rename file mv "$file" "$newname" echo "Renamed: $file -> $newname" done |
Renamed: merged_0 -> finished_0
Renamed: merged_1 -> finished_1
Renamed: merged_2 -> finished_2
Renamed: merged_3 -> finished_3
Renamed: merged_4 -> finished_4
Renamed: merged_5 -> finished_5
Renamed: merged_6 -> finished_6
Renamed: merged_7 -> finished_7
Renamed: merged_8 -> finished_8
Renamed: merged_9 -> finished_9
final: True Resulting in output: True
I have setup the docker container to run the model evaluation.
Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.
Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.
Here's a bash script that renames files from "merged_*" to "finished_*":
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 | #!/bin/bash # Check if directory path is provided if [ $# -ne 1 ]; then echo "Usage: $0 /path/to/files" exit 1 fi # Store directory path DIR="$1" # Check if directory exists if [ ! -d "$DIR" ]; then echo "Error: Directory $DIR does not exist" exit 1 fi # Change to specified directory cd "$DIR" || exit 1 # Loop through all files starting with "merged_" for file in merged_*; do # Check if files exist (to prevent error if no matches found) if [ -e "$file" ]; then # Create new filename by replacing "merged_" with "finished_" newname="${file/merged_/finished_}" # Rename file mv "$file" "$newname" echo "Renamed: $file -> $newname" fi done |
1 | chmod +x rename.sh |
1 | bash rename.sh /path/to/files |
I extracted the following code from that output:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 | #!/bin/bash # Check if directory path is provided if [ $# -ne 1 ]; then echo "Usage: $0 /path/to/files" exit 1 fi # Store directory path DIR="$1" # Check if directory exists if [ ! -d "$DIR" ]; then echo "Error: Directory $DIR does not exist" exit 1 fi # Change to specified directory cd "$DIR" || exit 1 # Loop through all files starting with "merged_" for file in merged_*; do # Check if files exist (to prevent error if no matches found) if [ -e "$file" ]; then # Create new filename by replacing "merged_" with "finished_" newname="${file/merged_/finished_}" # Rename file mv "$file" "$newname" echo "Renamed: $file -> $newname" fi done |
Running the following program:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 | #!/bin/bash # Check if directory path is provided if [ $# -ne 1 ]; then echo "Usage: $0 /path/to/files" exit 1 fi # Store directory path DIR="$1" # Check if directory exists if [ ! -d "$DIR" ]; then echo "Error: Directory $DIR does not exist" exit 1 fi # Change to specified directory cd "$DIR" || exit 1 # Loop through all files starting with "merged_" for file in merged_*; do # Check if files exist (to prevent error if no matches found) if [ -e "$file" ]; then # Create new filename by replacing "merged_" with "finished_" newname="${file/merged_/finished_}" # Rename file mv "$file" "$newname" echo "Renamed: $file -> $newname" fi done |
Renamed: merged_0 -> finished_0
Renamed: merged_1 -> finished_1
Renamed: merged_2 -> finished_2
Renamed: merged_3 -> finished_3
Renamed: merged_4 -> finished_4
Renamed: merged_5 -> finished_5
Renamed: merged_6 -> finished_6
Renamed: merged_7 -> finished_7
Renamed: merged_8 -> finished_8
Renamed: merged_9 -> finished_9
final: True Resulting in output: True
I have setup the docker container to run the model evaluation.
Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.
Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.
Here's a bash script that will rename files with the prefix "merged_" to "finished_" in a specified directory:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 | #!/bin/bash # Check if directory path is provided if [ $# -ne 1 ]; then echo "Usage: $0 /path/to/files" exit 1 fi # Store the directory path DIR="$1" # Check if directory exists if [ ! -d "$DIR" ]; then echo "Error: Directory $DIR does not exist" exit 1 fi # Change to the specified directory cd "$DIR" || exit 1 # Loop through all files starting with "merged_" for file in merged_*; do # Check if files exist (in case no matches are found) if [ -e "$file" ]; then # Create new filename by replacing "merged_" with "finished_" newfile="${file/merged_/finished_}" # Rename the file mv "$file" "$newfile" echo "Renamed: $file → $newfile" fi done |
1 | chmod +x rename.sh |
1 | bash rename.sh /path/to/files |
I extracted the following code from that output:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 | #!/bin/bash # Check if directory path is provided if [ $# -ne 1 ]; then echo "Usage: $0 /path/to/files" exit 1 fi # Store the directory path DIR="$1" # Check if directory exists if [ ! -d "$DIR" ]; then echo "Error: Directory $DIR does not exist" exit 1 fi # Change to the specified directory cd "$DIR" || exit 1 # Loop through all files starting with "merged_" for file in merged_*; do # Check if files exist (in case no matches are found) if [ -e "$file" ]; then # Create new filename by replacing "merged_" with "finished_" newfile="${file/merged_/finished_}" # Rename the file mv "$file" "$newfile" echo "Renamed: $file → $newfile" fi done |
Running the following program:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 | #!/bin/bash # Check if directory path is provided if [ $# -ne 1 ]; then echo "Usage: $0 /path/to/files" exit 1 fi # Store the directory path DIR="$1" # Check if directory exists if [ ! -d "$DIR" ]; then echo "Error: Directory $DIR does not exist" exit 1 fi # Change to the specified directory cd "$DIR" || exit 1 # Loop through all files starting with "merged_" for file in merged_*; do # Check if files exist (in case no matches are found) if [ -e "$file" ]; then # Create new filename by replacing "merged_" with "finished_" newfile="${file/merged_/finished_}" # Rename the file mv "$file" "$newfile" echo "Renamed: $file → $newfile" fi done |
Renamed: merged_0 → finished_0
Renamed: merged_1 → finished_1
Renamed: merged_2 → finished_2
Renamed: merged_3 → finished_3
Renamed: merged_4 → finished_4
Renamed: merged_5 → finished_5
Renamed: merged_6 → finished_6
Renamed: merged_7 → finished_7
Renamed: merged_8 → finished_8
Renamed: merged_9 → finished_9
final: True Resulting in output: True
I have setup the docker container to run the model evaluation.
Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.
Write a bash script to rename all files of the form "merged_*" to "finished_*". I want to call it by running bash rename.sh /path/to/files.
Here's a bash script that renames files from "merged_*" to "finished_*":
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 | #!/bin/bash # Check if directory path is provided if [ $# -ne 1 ]; then echo "Usage: $0 /path/to/files" exit 1 fi # Store the directory path DIR="$1" # Check if directory exists if [ ! -d "$DIR" ]; then echo "Error: Directory '$DIR' does not exist" exit 1 fi # Change to the specified directory cd "$DIR" || exit 1 # Loop through all files starting with "merged_" for file in merged_*; do # Check if files exist (to handle case where no files match pattern) if [ -e "$file" ]; then # Create new filename by replacing "merged_" with "finished_" newname="${file/merged_/finished_}" # Rename the file mv "$file" "$newname" echo "Renamed: $file → $newname" fi done |
1 | chmod +x rename.sh |
1 | bash rename.sh /path/to/files |
I extracted the following code from that output:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 | #!/bin/bash # Check if directory path is provided if [ $# -ne 1 ]; then echo "Usage: $0 /path/to/files" exit 1 fi # Store the directory path DIR="$1" # Check if directory exists if [ ! -d "$DIR" ]; then echo "Error: Directory '$DIR' does not exist" exit 1 fi # Change to the specified directory cd "$DIR" || exit 1 # Loop through all files starting with "merged_" for file in merged_*; do # Check if files exist (to handle case where no files match pattern) if [ -e "$file" ]; then # Create new filename by replacing "merged_" with "finished_" newname="${file/merged_/finished_}" # Rename the file mv "$file" "$newname" echo "Renamed: $file → $newname" fi done |
Running the following program:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 | #!/bin/bash # Check if directory path is provided if [ $# -ne 1 ]; then echo "Usage: $0 /path/to/files" exit 1 fi # Store the directory path DIR="$1" # Check if directory exists if [ ! -d "$DIR" ]; then echo "Error: Directory '$DIR' does not exist" exit 1 fi # Change to the specified directory cd "$DIR" || exit 1 # Loop through all files starting with "merged_" for file in merged_*; do # Check if files exist (to handle case where no files match pattern) if [ -e "$file" ]; then # Create new filename by replacing "merged_" with "finished_" newname="${file/merged_/finished_}" # Rename the file mv "$file" "$newname" echo "Renamed: $file → $newname" fi done |
Renamed: merged_0 → finished_0
Renamed: merged_1 → finished_1
Renamed: merged_2 → finished_2
Renamed: merged_3 → finished_3
Renamed: merged_4 → finished_4
Renamed: merged_5 → finished_5
Renamed: merged_6 → finished_6
Renamed: merged_7 → finished_7
Renamed: merged_8 → finished_8
Renamed: merged_9 → finished_9
final: True Resulting in output: True